LINK-BELT PKLB66M220FR split plummer block housing

LINK-BELT PKLB66M220FR is a reference of split plummer block housing, within Bearing housings. Request a quote for PKLB66M220FR via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

LINK-BELT PKLB series split plummer block housings are split housings that let you mount and remove the bearing without dismantling the shaft or the drive. They are used to support rotating shafts in equipment where maintenance is done with the system assembled, and they are common in conveyors, mills, pumps and process machines. MR Accesorios Industriales sells this line and advises you on choosing the housing based on shaft diameter and mounting type.

The designation of these housings is read in blocks. The letters PKLB identify the LINK-BELT split plummer block housing family; the first two digits after the letters indicate the housing series, which in this line can be 6600 or 6800; the number following the M corresponds to the shaft diameter for which the housing is machined; and the FR suffix indicates the mounting or sealing variant. So, for example, PKLB66M220FR and PKLB68M65FR belong to different series and are chosen by shaft size and mounting type.

In Argentine industry, these housings are found in belt and chain conveyors, bucket elevators, mixers, mills, centrifugal pumps and continuous process equipment. The ability to open the housing into two halves simplifies bearing replacement on lines where stopping the equipment means losing production. They are also used on low- and medium-speed drive shafts, where alignment and firm support are critical to the service life of the assembly.

To select the housing, start with the shaft diameter and the bearing you are going to house. Check the mounting type the equipment requires: split plummer block housings can come with a lock ring, set screws or an adapter sleeve, depending on the case. Check the sealing: in environments with dust, water or frequent washdown, additional protection is advisable. During mounting, ensure the two halves are aligned and the bolts are tightened evenly; proper lubrication and periodic re-tightening extend bearing life.

LINK-BELT housings are interchangeable with other brands of standard split plummer block housings, as long as the series, shaft diameter and mounting type match. It is not enough for the bearing to be the same: you have to compare center height, hole spacing and sealing system. If you have the original part number, we can tell you the compatible alternative; if not, with the shaft size and a photo of the mounting we can guide you.

If you need a split plummer block housing for your equipment, send us the part number on the part or on the drawing via WhatsApp. At MR Accesorios Industriales we quote the LINK-BELT reference or the alternative that best suits your application. We support workshops, plants and maintenance teams with technical advice and a prompt response.