LINK-BELT PKEB224M60H pillow block bearing

LINK-BELT PKEB224M60H is a reference of pillow block bearing, within Bearing housings. Request a quote for PKEB224M60H via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The LINK-BELT PKEB series pillow block housing is the housing unit that takes a mounted bearing from the B22400 series. It is used to support rotating shafts in transmission and conveying equipment, with a base that bolts to the structure and a housing that keeps the bearing aligned. It is a robust cast iron part, designed for continuous duty in industrial plants, and is selected by shaft diameter and the type of locking required by each piece of equipment.

The designation of these housings is read in blocks. PKEB identifies the pillow block housing family with split or solid housing depending on the model; 224 corresponds to the B22400 mounted bearing series; the M that follows indicates the locking system on the shaft, and the final number is the shaft diameter in millimeters. The final H indicates the housing variant. So a PKEB224M45H is a housing for a 45 mm shaft from the B22400 series. Always confirm the full part number when requesting a quote.

These housings appear in belt conveyors, bucket elevators, mixers, mills and process equipment in food, cement, mining and aggregate processing plants. In Argentina they are found in packaging lines, plant conveyor belts and agricultural machinery. The B22400 series is widely used in applications where the shaft rotates at moderate speeds and loads are predominantly radial, with some axial load depending on the mounting.

To select the housing, start from the shaft diameter and the B22400 bearing you already have defined. Check the locking type —the letter M indicates the adjustment system on the shaft— and the sealing the environment requires: a clean plant is not the same as one with dust or frequent washdown. During mounting, rest the base on a flat, rigid surface, align the shaft with the equipment and tighten the fastening bolts in pairs. Lubricate according to the duty cycle and check axial clearance before start-up.

LINK-BELT PKEB series housings are interchangeable with equivalent housings from other brands that use B22400 series mounted bearings, as long as the shaft diameter, locking type and base dimensions match. When replacing, compare the height to the shaft center and the distance between anchor holes. If the original equipment carries another brand, we can indicate the compatible alternative with the same shaft and locking code.

MR Accesorios Industriales sells the LINK-BELT line and can quote the housing you need. Send us the full part number on WhatsApp —for example PKEB224M50H— or the shaft diameter and the bearing you are going to mount, and we will reply shortly with the corresponding reference. If you are looking for a variant you do not see, write to us with the model and we will indicate the option.