Flange bearing 4 holes LINK-BELT PKB22567YFH

LINK-BELT PKB22567YFH is a flange bearing 4 holes reference, within Bearing housings. Request a quote for PKB22567YFH via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT PKB YFH series flange bearing housing is a 4-bolt housing for mounting insert bearings. It is fastened to the structure with four bolts and leaves the shaft perpendicular to the mounting face. It is used in equipment where the bearing is flanged to a plate or box: conveyors, mixers, blowers and drives in general. MR Accesorios Industriales supplies this line as an official brand.

The PKB YFH designation is read in parts. PKB identifies the 4-bolt flange housing; YFH defines the housing and the insert locking system. The intermediate number, as in PKB22567YFH or PKB22580YFH, refers to the B22500 series and the size of the bearing it houses. Each size in the series shares the bolt hole pattern and the corresponding shaft diameter. To choose, the full part number is the governing data.

These housings appear in food, cement, aggregate and wastewater treatment plants, especially in belt conveyors and screw conveyors. They are also mounted on mixers, fans and process machines where the shaft must be flanged to a wall or frame. In Argentina they are seen in milling lines, concrete plants and grain handling equipment, always with the flange bolted to the structure and the shaft protruding at the front.

To select, start from the shaft diameter and the flange bolt hole pattern. Verify that the insert bearing is of the B22500 series compatible with the housing. During mounting, seat the flange flat on the surface, tighten the four bolts in a cross pattern and check shaft alignment before final torque. If the environment has dust or moisture, choose the appropriate insert sealing and lubricate according to the duty cycle.

Regarding interchangeability, 4-bolt flange housings are available from several brands with standardized dimensions. Equivalence is established by shaft diameter, hole spacing and housing height, not by the commercial part number. Often a housing from another brand replaces the LINK-BELT if those dimensions match. Send us the dimensions or the equipment part number and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the LINK-BELT line and manufactures split plummer block housings, ANSI roller chains and pulleys. If you need the PKB YFH housing for equipment that is down, write to us on WhatsApp with the full part number or the flange dimensions and shaft diameter. We will quote you promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.