Flange bearing 3 holes LINK-BELT P3U2E20N

LINK-BELT P3U2E20N is a flange bearing 3 holes reference, within Bearing housings. Request a quote for P3U2E20N via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 3-bolt flange bracket with 200 series insert bearing is an assembled unit that mounts on a flat surface and supports a rotating shaft. The triangular flange with three mounting points provides stability and makes shaft alignment easy. It is used in equipment where the bearing must be supported on one face, such as conveyors, mixers and fans. MR Accesorios Industriales supplies this Link-Belt line in Buenos Aires, Argentina.

The designation of these brackets is read in blocks: the letter P indicates the flange type, the number that follows defines the series and shaft diameter, and the final letters identify sealing and locking variants. In the 200 series, examples such as P3U2E20N, P3U2E32N, P3U2E48N, P3U2E56N and P3U2E64N show how the code changes according to shaft size. The N suffix corresponds to the 3-bolt flange configuration. The complete part number unambiguously identifies the bracket you need.

These brackets are found in food, beverage, cement and aggregate processing plants. Also in belt conveyors, bucket elevators, horizontal mixers and ventilation equipment. In Argentina they are common in the oilseed industry, in milling plants and in packaging lines. The 3-bolt flange allows mounting on folded sheet metal or profile structures, with access to the bolts from one side only. It is a practical solution when the shaft is perpendicular to the mounting surface.

To choose correctly, take into account the shaft diameter, the type of load and the environmental conditions. The insert seal determines whether the bracket withstands dust, moisture or frequent washdowns. Lubrication must be the one specified for the insert and renewed according to the duty cycle. During mounting, place the flange on a clean, flat surface, tighten the bolts in a cross pattern and check that the shaft turns without effort. Careful alignment extends bearing life and reduces vibration.

Insert bearing brackets from different brands are often interchangeable if the series, shaft diameter and flange type match. Differences appear in the insert locking system, the sealing and the housing tolerance. When replacing a bracket, compare the overall height, the bolt hole spacing and the shaft diameter. If in doubt, send us the old part number or a photo and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the Link-Belt line in Buenos Aires, Argentina, with more than 80 years of experience in bearings and power transmission. If you need a 200 series flange bracket, write to us on WhatsApp with the part number or model you are looking for and we will quote it promptly. We can also advise you on the right insert for your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.