LINK-BELT MFCS247N flange bearing 4 holes

LINK-BELT MFCS247N is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for MFCS247N via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

Link-Belt MFCS line housings are 4-bolt flange units with a Series 200 mounted bearing. They are used to support rotating shafts on walls, structures or frames, where firm front mounting and simple alignment are required. MR Accesorios Industriales sells this line and helps you choose the unit according to shaft diameter and the type of load in your equipment.

The MFCS designation reads as a family of flange housings with a mounted bearing. The letters MFCS identify the assembly, and the number that follows refers to the shaft size of Series 200. The final N indicates the unit's configuration within that series. That is why, when you send us the complete part number, we know exactly which mounting you need.

These housings appear in belt and chain conveyors, elevators, mixers, blowers, pumps and process equipment. In food, chemical, grain and aggregate processing plants they are chosen for the ease of mounting on sheet metal or structure and for the possibility of replacing the complete unit without disassembling the shaft. They are also seen in wash bays, cooling tunnels and packaging lines, where the environment demands a reliable seal.

To select correctly, first look at the shaft diameter the housing accepts and then the type of load: radial, axial or combined. Check that the flange has its four holes aligned with the structure and that the mounting surface is flat. During installation, tighten the bolts in a cross pattern and verify that the shaft turns freely. Correct lubrication and sealing determine service life: follow the manufacturer's recommendation for the seal and the greasing interval.

If you need to replace a housing from another brand, the most practical approach is to compare the series, shaft diameter and flange type. This series is a very widespread standard and usually has equivalents among different manufacturers, but it is advisable to confirm hole dimensions and center height before mounting. At MR Accesorios Industriales we tell you the alternative compatible with your part number.

Send us the part number shown on the housing by WhatsApp and we will quote it shortly. If you cannot find it, send us the shaft diameter and a photo of the flange, and we will help you identify the unit you need.