Flange bearing 4 holes LINK-BELT MFCS228N

LINK-BELT MFCS228N is a flange bearing 4 holes reference, within Bearing housings. Request a quote for MFCS228N via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Link-Belt MFCS supports are 4-bolt flange units with mounted bearings from the 200 series. They are used to support rotating shafts on walls, structures or frames, where firm front mounting and simple alignment are required. MR Accesorios Industriales sells this line as an official brand and helps you choose the unit according to shaft diameter and load type of your equipment.

The MFCS designation is read as a family of flange supports with mounted bearings. The letters MFCS identify the assembly, and the number that follows —223, 224, 227, 228, 231, 232, 235 or 239, among others— refers to the shaft size of the 200 series. The final N indicates the unit configuration within that series. Therefore, when you send us the complete code, such as MFCS223N or MFCS239N, we know exactly which mounting you need.

These supports appear in belt and chain conveyors, elevators, mixers, blowers, pumps and process equipment. In food, chemical, grain and aggregate processing plants they are chosen for ease of mounting on sheet metal or structure and for the possibility of replacing the complete unit without disassembling the shaft. They are also seen in wash bays, cooling tunnels and packaging lines, where the environment demands reliable sealing.

To select correctly, first look at the shaft diameter that the support accepts and then the load type: radial, axial or combined. Check that the flange has the four holes aligned with the structure and that the mounting surface is flat. During mounting, tighten the bolts in a cross pattern and verify that the shaft turns freely. Correct lubrication and sealing determine service life: follow the manufacturer's recommendation for the seal and grease interval.

If you need to replace a support from another brand, the most practical approach is to compare the series, shaft diameter and flange type. The 200 series is a very widespread standard and usually has equivalents among different manufacturers, but it is advisable to confirm hole dimensions and center height before mounting. At MR Accesorios Industriales we indicate the alternative compatible with your code.

Send us via WhatsApp the code on the support —for example, MFCS228N or MFCS235N— and we will quote it shortly. If you cannot find it, send us the shaft diameter and a photo of the flange, and we will help you identify the unit you need.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.