Product page
Insert bearing LINK-BELT MCLG228NLPA
- Manufacturer Part Number
- MCLG228NLPA
- Brand
- LINK-BELTOfficial brand
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- M
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT MCLG228NLPA is a insert bearing reference, within Bearings. Request a quote for MCLG228NLPA via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The LINK-BELT M series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split plummer block housings and wall units. It is used in equipment where a rotating shaft must be supported with simple alignment and accessible maintenance. MR Accesorios Industriales supplies this line as an official brand and helps you identify the exact reference for your application.
The M series designation is built with the prefix MCLG, followed by a three-digit number and the suffix NLPA. The number indicates the insert size within the series: for example, MCLG216NLPA, MCLG219NLPA or MCLG224NLPA. The NLPA suffix identifies the sealing and locking configuration specific to this line. To choose correctly, send us the complete code shown on the housing or on the old bearing.
These inserts are mounted in split plummer block housings, flange units and take-up frames used in conveyor belts, bucket elevators, mixers and process equipment. In Argentina you will find them in food plants, cement plants, aggregate plants and agro-industrial facilities, where access for lubrication or replacement is limited and simple shaft mounting is a priority.
To select the insert, take into account the shaft diameter, the housing type and the working conditions: presence of dust, water or frequent washdowns. The sealing of the M series insert is designed to retain lubrication and block the entry of contaminants. During mounting, check that the shaft is clean and free of burrs, and that the housing is aligned so as not to load the bearing unevenly.
Insert bearings are interchanged between brands by series number and shaft dimensions, but interchangeability is not always direct: the locking system, sealing and inner ring tolerance change. If your equipment carries a LINK-BELT insert, the safest option is to replace it with the same code or with the compatible alternative we indicate. Do not force an insert from another series just because the diameter matches.
If you need to replace a LINK-BELT M series insert bearing, send us the code shown on the housing, a photo of the part or the shaft dimensions via WhatsApp. At MR Accesorios Industriales we quote the reference and, if applicable, indicate the compatible alternative. We handle technical maintenance inquiries and industrial purchases in Buenos Aires, Argentina.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Eje o agujero
- 1 3/4 in
Frequently Asked Questions
- How do I identify the insert bearing I need?
- Look for the code engraved on the bearing or on the housing: it starts with MCLG, followed by three numbers and the NLPA suffix. If you cannot see it, send us a photo and the shaft dimensions via WhatsApp and we will help you identify it.
- Can it be replaced with an insert from another brand?
- Sometimes yes, but it depends on the shaft diameter, the locking type and the sealing. It is not enough for the shaft dimension to match. Send us the original code and we will indicate which compatible alternative fits your equipment.
- What industrial applications do these inserts have?
- They are used in conveyor belts, elevators, mixers and process equipment in food, cement, aggregate and agro-industrial plants. They are designed for assemblies where maintenance is periodic and the environment may contain dust or moisture.