LINK-BELT FX3Y2B08N flange bearing 2 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT FX3Y2B08N is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for FX3Y2B08N via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The 2-bolt flange mounted bearing is a ready-to-install assembly that combines an insert bearing with a flange housing. It is fastened with two bolts and is used in equipment where the shaft must sit perpendicular to the mounting surface. Link-Belt is a brand that MR Accesorios Industriales sells in Buenos Aires, Argentina.
The designation FX…Y…B…N is read in blocks: the letters FX identify the 2-bolt flange housing series; the Y indicates the insert type with set screws; the B corresponds to the split housing; the final N indicates the sealing. The example FX3Y2B08N shows the structure: the number after FX refers to the housing size, the one after Y to the shaft diameter, and the one after B to the fastening type. To request a quote, send the complete part number.
These mounted bearings are used in belt conveyors, bucket elevators, mixers, mills and process equipment in food, chemical and aggregate plants. In Argentina they are common in the oilseed and meat industries and in water treatment plants. Their 2-bolt flange allows them to be mounted on sheet metal or steel structures with simple alignment and quick access for maintenance.
To select the housing, take into account the shaft diameter, the load type (radial, axial or combined) and the environmental conditions. The N sealing protects against dust and moisture; if there are frequent washdowns, it is advisable to check the seal type. Installation requires the flange to rest flat and the bolts to be tightened evenly. Proper lubrication and correct alignment extend the life of the insert.
Flange mounted bearings are available from different brands with their own designations. Equivalences are established by dimensions: shaft diameter, bolt hole spacing and overall height. It is not enough for the part number to look similar; the dimensional data sheet must be compared. MR Accesorios Industriales will tell you the compatible alternative.
If you need this flange mounted bearing, send the part number FX3Y2B08N or the model you are looking for by WhatsApp. At MR Accesorios Industriales we will quote it and, if applicable, offer you the equivalent option. We also manufacture split plummer block housings and custom parts to complete your assembly.
Dimensions
- Bore
- 1/2 in
Frequently Asked Questions
- What does the part number FX3Y2B08N mean?
- The part number identifies a 2-bolt flange mounted bearing of the FX series. The letters Y, B and N indicate the insert type, the housing and the sealing. The example FX3Y2B08N serves as a guide to read other references in the same family.
- How do I know if it is compatible with the one I need to replace?
- Compare the shaft diameter, the bolt hole spacing of the flange and the overall height of the housing. Those three data points define interchangeability. If you send me those measurements or the original part number, I will tell you which alternative works.
- Can it be mounted in any position?
- The 2-bolt flange allows vertical or horizontal mounting, as long as the shaft sits perpendicular to the support. Check that the surface is flat and that the bolts are tightened evenly. If there is misalignment, the insert works under strain and its service life is shortened.