LINK-BELT FX3CL2E36N flange bearing 2 holes

LINK-BELT FX3CL2E36N is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for FX3CL2E36N via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Link-Belt 200 series 2-bolt flange bearing is a mounted bearing ready to be fastened to a flat surface with two bolts. It is used to support shafts in equipment where the mounting must be flush and centered, such as belt conveyors, mixers, fans and process machinery. MR Accesorios Industriales supplies this Link-Belt line in Buenos Aires, Argentina, and advises you on choosing the correct configuration for your application.

The designation of these bearings is read in blocks. FX identifies the 2-bolt flange family; the number that follows —3 in the examples— indicates the housing size; CL corresponds to the mounted bearing series; E indicates the locking type of the inner ring on the shaft; and the final number —20, 26, 32, 36— is the shaft diameter. The letter N at the end distinguishes the sealing or cover variant. Thus, FX3CL2E20N and FX3CL2E36N share family and size, but change the shaft diameter.

In Argentine industry these bearings appear in belt conveyors, bucket elevators, screens, solids mixers and pumping equipment. They are also found in food, cement, aggregate and water treatment plants, where the flange allows mounting on folded sheet metal or profile structures. Being a flange type, the shaft is perpendicular to the mounting surface, which simplifies alignment in compact equipment and in positions where there is no space for a pillow block.

To select the bearing, start from the shaft diameter and the type of load: radial, axial or combined. Verify that the flange has holes compatible with your structure and that the bearing accepts the misalignment inherent to the equipment. During installation, clean the seat, check the parallelism of the flange and tighten the bolts in a cross pattern. Lubrication and sealing —E in the designation— define resistance to dust, water or washdowns; choose the variant suited to the environment.

Mounted bearings are interchanged between brands by shaft number, series and flange configuration, but not all brands use the same nomenclature. To replace a Link-Belt with another brand, compare shaft diameter, distance between holes, center height and locking type. MR Accesorios Industriales indicates the compatible alternative or manufactures it to order when it comes to special parts.

If you have the bearing part number —for example, FX3CL2E26N— send it by WhatsApp to MR Accesorios Industriales and we will quote it promptly. You can also ask us about 200 series variants, configurations with different sealing or bearings for shafts not listed in the examples. In Buenos Aires, Argentina, we resolve technical questions about installation and replacement.