Product page
Flange bearing 2 holes LINK-BELT FX3CL2B23N*Δ■
- Manufacturer Part Number
- FX3CL2B23N*Δ■
- Brand
- LINK-BELTOfficial brand
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- CL
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT FX3CL2B23N*Δ■ is a flange bearing 2 holes reference, within Bearing housings. Request a quote for FX3CL2B23N*Δ■ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The series 200 2-bolt flange bearing housing is a mounted bearing with a flange housing, designed to secure rotating shafts to flat structures. It is used when the shaft must be perpendicular to the mounting surface and simple fastening with two bolts is required. Link-Belt is an official brand that MR Accesorios Industriales sells in Buenos Aires, Argentina.
The designation of these housings is read in blocks: FX indicates the flange housing type; CL corresponds to the mounted bearing series; B indicates the fastening variant; and the number that follows —08, 16, 19, 23, 24, 27, 28, 31— identifies the shaft diameter. The final letter N distinguishes the sealing or the unit configuration. Thus, an FX3CL2B16N is a 2-bolt flange housing for a 16 shaft, and an FX3CL2B31N for a 31 shaft. Additional symbols mark sealing or material options.
These housings are mounted on belt conveyors, bucket elevators, mixers, rotary dryers, centrifugal pumps and industrial fans. In Argentina they are common in food, cement, mining, water treatment plants and in the oilseed industry, where the 2-bolt flange simplifies alignment and replacement on plates or structural profiles.
To select the housing, check the shaft diameter, the distance between flange holes and the required load capacity. The sealing must be chosen according to the environment: contact for dust or moisture, labyrinth for high speed. Mounting requires cleaning the seat, lubricating the bearing with the recommended grease and tightening the bolts in a cross pattern to avoid deformation. Alignment between housings is key for service life.
Link-Belt series 200 flange housings are interchangeable with those of other brands that use the same mounting standard and shaft diameter. When requesting a quote, it is advisable to indicate the full part number and the working conditions so that MR Accesorios Industriales can indicate the compatible alternative or confirm the equivalence.
If you need a 2-bolt flange housing, send the part number by WhatsApp to MR Accesorios Industriales. We will send you a quote shortly and advise you so that you choose the correct variant for your application.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
- Eje o agujero
- 1 7/16 in
Frequently Asked Questions
- How do I identify the shaft diameter in an FX3CL2B housing?
- The number that follows the B indicates the shaft diameter in inches or millimeters according to the standard. For example, 16 corresponds to a 16 shaft. Check the full part number and ask us on WhatsApp if you have doubts.
- What does the letter N at the end of the part number mean?
- The final N identifies a sealing variant or unit configuration. It may indicate a type of radial shaft seal, a cover or a specific material. To confirm the exact feature of your part number, write to us on WhatsApp.
- Are Link-Belt series 200 housings compatible with other brands?
- Yes, 2-bolt flange housings with the same mounting standard and shaft diameter are interchangeable between brands. When requesting a quote, send us the part number and the dimensions of your equipment so we can indicate the compatible alternative.