LINK-BELT FX3CL2B08N flange bearing 2 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- CL
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT FX3CL2B08N is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for FX3CL2B08N via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The 200 series 2-bolt flange bearing housing is a mounted bearing with a flange housing, designed to secure rotating shafts to flat structures. It is used when the shaft must be perpendicular to the mounting surface and a simple two-bolt fastening is needed. Link-Belt is a brand that MR Accesorios Industriales sells in Buenos Aires, Argentina.
The designation of these housings is read in blocks: FX indicates the flange housing type; CL corresponds to the mounted bearing series; B indicates the mounting variant; and the number that follows identifies the shaft diameter. The final letter N distinguishes the sealing or the unit configuration. Thus, an FX3CL2B16N is a 2-bolt flange housing for a 16 shaft, and an FX3CL2B31N for a 31 shaft. Additional symbols mark sealing or material options.
These housings are mounted on belt conveyors, bucket elevators, mixers, rotary dryers, centrifugal pumps and industrial fans. In Argentina they are common in food, cement, mining, water treatment plants and in the oilseed industry, where the 2-bolt flange simplifies alignment and replacement on plates or structural profiles.
To select the housing, verify the shaft diameter, the flange hole spacing and the required load capacity. The sealing should be chosen according to the environment: contact seal for dust or moisture, labyrinth for high speed. Mounting requires cleaning the seat, lubricating the bearing with the recommended grease and tightening the bolts in a cross pattern to avoid deformation. Alignment between housings is key to service life.
Link-Belt 200 series flange housings are interchangeable with those of other brands that use the same mounting standard and shaft diameter. When requesting a quote, it is advisable to indicate the full code and working conditions so that MR Accesorios Industriales can indicate the compatible alternative or confirm the equivalence.
If you need a 2-bolt flange housing, send the code via WhatsApp to MR Accesorios Industriales. We will quote promptly and advise you so you choose the correct variant for your application.
Dimensions
- Bore
- 1/2 in
Frequently Asked Questions
- How do I identify the shaft diameter on an FX3CL2B housing?
- The number after the B indicates the shaft diameter in inches or millimeters according to the standard. Verify the full code and ask us via WhatsApp if you have doubts.
- What does the letter N at the end of the code mean?
- The final N identifies a sealing or unit configuration variant. It may indicate a type of seal, a cover or a specific material. To confirm the exact feature of your code, write to us via WhatsApp.
- Are Link-Belt 200 series housings compatible with other brands?
- Yes, 2-bolt flange housings with the same mounting standard and shaft diameter are interchangeable between brands. When requesting a quote, send us the code and the measurements of your equipment so we can indicate the compatible alternative.