LINK-BELT FEB224M50H flange bearing 4 holes

LINK-BELT FEB224M50H is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for FEB224M50H via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The LINK-BELT FEB flange bearing is a 4-bolt flange mounted bearing from the B22400 series, designed to secure rotating shafts to flat structures with simple, rigid alignment. It is used in equipment where the bearing is bolted to a plate or housing and the shaft is perpendicular to the mounting plane. MR Accesorios Industriales sells this line and advises you on choosing the right variant for your application.

The FEB designation combines the housing type with the bearing series and shaft diameter. In the examples FEB224M40H, FEB224M45H and FEB224M50H, the block 224 identifies the B22400 series; the letter M indicates the bearing-to-shaft locking system, and the number that follows corresponds to the shaft diameter in millimeters. The suffix H distinguishes the housing configuration. The complete part number unambiguously defines which bearing you need.

These bearings are found in belt conveyors, bucket elevators, mixers, mills, pumps and industrial fans. In Argentina they appear in food, cement, grain, tannery plants and in process lines where a robust, easily replaceable flange support is needed. The B22400 series is one of the most widespread for medium-diameter drive shafts, and therefore is available in several locking and sealing alternatives.

To select the bearing, first verify the shaft diameter and the locking type your mounting allows. Then check the sealing: if the environment has dust, water or bulk product, a more closed protection is advisable. Lubrication must be the one specified for the mounted bearing, and mounting requires that the flange rests flat and that the shaft is aligned with the equipment. Any misalignment or uneven tightening of the four holes shortens bearing life.

Regarding interchangeability, 4-bolt flange bearings from different brands can share mounting dimensions if the series and shaft diameter match, but it is not advisable to rely on the part number alone: you must compare the hole spacing, flange diameter and locking system. MR Accesorios Industriales indicates the compatible alternative, so you don't have to guess.

If you already have the series part number, send it on WhatsApp to MR Accesorios Industriales along with a photo of the mounting if you can. That way we will quote the correct bearing or offer the equivalent option that best suits your equipment. We also manufacture split plummer block housings and other custom parts if your application requires it.