LINK-BELT FEB22424H flange bearing 3 holes

LINK-BELT FEB22424H is a reference of flange bearing 3 holes, within Bearing housings. Request a quote for FEB22424H via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

Link-Belt FEB H housings are three-bolt flange units that house a mounted bearing and allow the shaft to be fixed to a flat structure. They are used when a rotating shaft needs to be supported with a compact, front-mounting flange, for example in conveyors, mixers, elevators and process equipment. MR Accesorios Industriales sells this line and advises you on choosing the right unit according to shaft diameter and load type.

The FEB H designation is read in blocks: the letters FEB identify the flange housing family, and the number that follows summarizes the size and series of the housed bearing. The examples show series B22400 and B22600, which correspond to medium-duty mounted units. The H suffix completes the reference and indicates the unit configuration within the line. To order the replacement, simply provide the full code as it appears on the nameplate or on the equipment drawing.

These housings are found in food and beverage plants, water treatment plants, cement plants, feed lots and milling facilities. They are also used in belt and chain conveyors, bucket elevators, horizontal mixers, blowers and industrial washing equipment. In the Argentine market they are used in packaging lines, cold storage plants and logistics warehouses. The three-bolt flange simplifies anchoring to sheet metal or profile structures, and the mounted bearing absorbs misalignment better than a rigid one-piece housing.

To select the unit, start with the shaft diameter required by the equipment and the type of load: radial, axial or combined. Check that the flange has clearance for the three bolts and that the mounting surface is flat and clean. During mounting, tighten the bolts in a crosswise, progressive pattern, and check shaft alignment before final torque. If the environment has dust, water or frequent washdowns, choose the appropriate sealing and check the condition of the grease. Correct lubrication and periodic re-tightening extend the life of the mounted bearing.

Flange mounted units are available from several brands and lines with their own nomenclature. Interchangeability is not defined by shaft diameter alone: you must compare bolt hole spacing, flange diameter, center height and the bearing locking type. At MR Accesorios Industriales we will indicate the alternative compatible with those dimensions. If the housing is for an old machine, it is best to send a photo of the flange and shaft to avoid mistakes.

MR Accesorios Industriales sells the Link-Belt line and manufactures split plummer block housings, ANSI roller chains and pulleys in Buenos Aires, Argentina. If you need to replace a housing from this series, message us on WhatsApp with the full code and shaft dimensions. We will quote the unit and, if needed, indicate the compatible alternative. We can also advise you on sealing, lubrication and mounting so the unit performs under your plant conditions.