Flange bearing 4 holes LINK-BELT FEA319

LINK-BELT FEA319 is a flange bearing 4 holes reference, within Bearing housings. Request a quote for FEA319 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

LINK-BELT FEA 300 series flange bearings are 4-bolt mounted units that combine an insert bearing with a flange housing. They are used to support rotating shafts in equipment where the flange is fixed to a flat surface, such as conveyors, mixers, pumps and fans. MR Accesorios Industriales supplies this line as an official brand, with more than 80 years of experience in the Argentine industrial market.

The FEA designation identifies the family of 4-bolt flange bearings. The numbers that follow, as in FEA319, FEA323, FEA327, FEA331, FEA335, FEA339, FEA343 and FEA344, indicate the shaft size for which the unit is intended: the higher the number, the larger the shaft diameter and load capacity. The 300 series groups medium-section sizes, suitable for applications with moderate loads and normal operating speeds.

These bearings are chosen in food and beverage plants, material handling, water treatment, cement and mining, among other Argentine industries. The 4-bolt flange allows mounting the unit on sheet metal or structure with four screws, which simplifies alignment and replacement. They are common in belt conveyors, bucket elevators, agitators, blowers and process equipment where the shaft must be perpendicular to the support surface.

To select the bearing, consider the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. The insert seal defines the protection against dust, water or frequent washdowns; choose the appropriate variant for the environment. During mounting, check that the flange sits flat, tighten the screws in a cross pattern and check the alignment of the shaft with the drive equipment. Correct lubrication and internal bearing clearance influence service life.

LINK-BELT FEA 300 series bearings can be interchanged with equivalent units from other brands that share the same shaft diameter and flange hole pattern. To find the alternative, compare the main dimensions: shaft diameter, distance between holes and center height. If the code does not match, the replacement is defined by those measurements and by the type of seal required.

If you need an FEA flange bearing for your equipment, write to us via WhatsApp with the complete code (for example, FEA319 or FEA343) or with the shaft and flange dimensions. At MR Accesorios Industriales we will quote you promptly and indicate the compatible alternative if applicable.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.