LINK-BELT FC3U239N flange bearing 3 holes

LINK-BELT FC3U239N is a reference of flange bearing 3 holes, within Bearing housings. Request a quote for FC3U239N via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Link-Belt 3-bolt flange bracket is a mounted bearing ready to be fastened to a flat surface with three bolts. It is used to guide shafts in equipment where the mounting must stay firm and aligned, such as conveyor belts, elevators, mixers and process machines. MR Accesorios Industriales sells this Link-Belt line in Buenos Aires, Argentina, and advises you on choosing the correct code according to the shaft and the type of load.

The designation of these brackets is read in blocks: FC indicates the 3-bolt flange, the number that follows (3) defines the housing type, the letter U corresponds to the insert bearing unit and the three-digit number (214, 215, 216…) is the size within the 200 series. The final letter N indicates a construction variant of the assembly. Thus, an FC3U214N and an FC3U216N share the format but differ in size; the complete code is the data we ask for to quote.

These brackets are seen in food and beverage plants, cement plants, grain facilities, water treatment plants and packaging lines. In Argentina they are common in belt conveyors, bucket elevators, agitators and dryers, where the 3-bolt flange allows mounting onto sheet metal or structure without machining. The 200 series is the medium-duty section and covers a wide range of shaft diameters, which is why it is one of the most requested in maintenance.

To select well, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. If there is dust, water or frequent washdowns, a tighter seal is advisable; if the equipment runs fast, check the lubrication and internal clearance. During mounting, rest the flange on a clean, flat surface, tighten the three bolts evenly and align the shaft before starting up to avoid stress on the insert.

Mounted brackets are interchangeable between brands by series number and dimensions: a 200 series code from another company can replace a Link-Belt one if the shaft diameter, the distance between holes and the type of fastening match. That equivalence is confirmed with the equipment's technical data sheet. If you cannot find the exact reference, write to us with the code or model shown on the machine and we will indicate the compatible alternative.

MR Accesorios Industriales sells Link-Belt in Buenos Aires, Argentina. Send us the code you need by WhatsApp, along with a photo of the part if you have one, and we will quote it shortly.