LINK-BELT FB22416H flange bearing 3 holes

LINK-BELT FB22416H is a reference of flange bearing 3 holes, within Bearing housings. Request a quote for FB22416H via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

Link-Belt FB H housings are flange units with a mounted bearing, designed to secure rotating shafts to metal structures or frames. They are used when the shaft must be perpendicular to the mounting surface and firm fastening with three anchor points is required. MR Accesorios Industriales sells this line for plants, workshops and process equipment in Buenos Aires, Argentina.

The FB H designation is read in blocks: FB identifies the flange housing family, the H distinguishes the housing variant, and the number that follows — as in FB22416H or FB22623H — refers to the insert bearing series and the shaft size. The examples show how the final digit changes with the size. To choose, send the full part number shown on the nameplate or the equipment drawing.

These housings appear in belt conveyors, bucket elevators, mixers, dryers and packaging lines. In Argentina they are found in food plants, cement plants, cold storage facilities and mining operations, where the shaft works with moderate radial load and some axial thrust. The three-hole flange allows mounting on folded sheet metal or profile structures, with access for greasing from the front.

To select, take into account the shaft diameter, the type of sealing — single contact, labyrinth or oil seal — and the internal clearance of the insert bearing. Installation requires the flange to rest flat and the three bolts to be tightened in a cross pattern so as not to deform the housing. Lubrication is done through the built-in grease fitting, with grease compatible with the working temperature. Check the shaft alignment with respect to the flange before starting up.

Link-Belt series have equivalents in other lines of mounted bearings with a three-hole flange. Interchangeability depends on the shaft diameter, the distance between holes and the center height. Do not replace by part number without comparing those dimensions. If you need an alternative, send us the housing dimensions and the shaft diameter.

MR Accesorios Industriales sells the Link-Belt line and manufactures split plummer block housings, ANSI chains and pulleys. If you have the series part number, write to us on WhatsApp and we will quote it promptly. We can also indicate the compatible alternative if you are looking for a variant that does not appear in the listing.