Flange bearing 3 holes LINK-BELT F3S223E

LINK-BELT F3S223E is a flange bearing 3 holes reference, within Bearing housings. Request a quote for F3S223E via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

Link-Belt series 200 3-bolt flange housings are mounted units that combine an insert bearing with a triangular flange housing. They are used to support rotating shafts on flat structures, where the flange is bolted directly to the sheet metal or frame. MR Accesorios Industriales supplies this line as an official brand and advises you on choosing the correct variant according to shaft diameter and locking type.

The designation of these housings is read in blocks. The initial letter F indicates a 3-bolt flange; the first number after the F indicates the housing type or its configuration; the S corresponds to the insert bearing series; the following two digits identify the nominal shaft diameter in sixteenths of an inch; and the final E distinguishes the insert design, usually with set screw or eccentric collar. Therefore, a part number such as F3S210E is not interchangeable with F3S211E: the shaft size changes. Send me the complete part number and we will quote the exact variant.

These housings appear in belt conveyors, bucket elevators, mixers, rotary dryers and packaging lines. In the Argentine market they are seen in food, cement, grain and chemical industry plants, where the 3-bolt flange allows mounting on sheet metal profiles without machining. They are also chosen in equipment where the shaft must be perpendicular to the mounting surface and the housing must absorb small misalignments inherent to assembly.

To select correctly, first look at the shaft diameter and then the insert type: there are versions with set screws, with eccentric collar or with taper adapter. The flange housing can be cast iron or stamped steel, depending on the series. During assembly, place the flange on a clean, flat surface, tighten the three bolts in a cross pattern and check that the shaft turns freely. Lubrication of the insert and sealing against dust and water are key to service life; if the environment is humid, additional protection is advisable.

Regarding equivalences, series 200 3-bolt flange housings with insert bearing are available from several brands, but flange dimensions and center height do not always match between manufacturers. Do not rely only on the part number: compare shaft diameter, hole spacing and insert locking type. If you need to replace a Link-Belt, write to us on WhatsApp with the part number F3S2xxE or a photo of the part and we will indicate the compatible alternative.

MR Accesorios Industriales has more than 80 years in the industry and supplies the Link-Belt line as an official brand. If you cannot find the part number you are looking for, send us the model or the shaft and flange dimensions: we will quote you promptly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.