Flange bearing 3 holes LINK-BELT F3CL2B35N

LINK-BELT F3CL2B35N is a flange bearing 3 holes reference, within Bearing housings. Request a quote for F3CL2B35N via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Link-Belt series 200 3-bolt flange bracket is a mounted bearing ready to install on sheet metal or a structure with three fastening points. It is used when a rotating shaft must be supported with fixed alignment and front access, for example in conveying, ventilation or process equipment where the mounting is bolted to a wall or frame. MR Accesorios Industriales supplies this line as an official brand and advises you on choosing the right variant according to shaft diameter and fastening type.

The designation of these brackets is read in blocks: the letter F indicates flange, the number that follows —3 in the examples F3CL2B31N and F3CL2B35N— corresponds to the number of fastening bolts, CL identifies the flange bracket family, 2 indicates the bearing series (series 200) and the final letters B and N distinguish sealing and housing configuration variants. The digits that close the code (31, 35) relate to the shaft diameter and the bearing size. The complete part number gives access to the exact variant.

These flanged brackets are seen in belt conveyors, bucket elevators, mixers, blowers and process lines in food, chemical and aggregate processing plants. In Argentina they are common in milling equipment, screens and forced ventilation systems, where the mounted bearing simplifies installation and replacement. The three-bolt flange allows it to be fastened to a flat face with good rigidity and, since the shaft is perpendicular to the mounting plane, repeatable alignment is achieved without additional parts.

To select the bracket, start from the shaft diameter and the part number shown on the equipment plate. Check the sealing type: variants with B usually incorporate seals that protect against dust and moisture, while the letter N may indicate a specific housing configuration. During mounting, rest the flange on a clean, flat surface, tighten the three bolts in a cross pattern and verify that the shaft turns without effort. Lubrication and internal clearance are already defined by the mounted bearing; you only need to ensure alignment and cleanliness.

Flanged mounted bearings are available under different nomenclatures depending on the manufacturer: equivalences between brands that use series 200 as a base are common. To replace a bracket, compare the shaft diameter, the number and position of the bolts, and the sealing type. At MR Accesorios Industriales we will point you to the compatible alternative if you send us the original part number or the shaft and flange dimensions. The brand does not have to match for operation to be correct.

If you need the Link-Belt series 200 3-bolt flange bracket, send us the complete part number on WhatsApp —for example F3CL2B31N or F3CL2B35N— or the shaft and flange dimensions. We will quote you promptly and, if you are looking for another variant of the same family, we will source it or offer you the equivalent option. MR Accesorios Industriales has more than 80 years in the industrial sector and answers technical questions on mounting and selection.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.