Flange bearing 4 holes LINK-BELT F3CL214N*Δ■

LINK-BELT F3CL214N*Δ■ is a flange bearing 4 holes reference, within Bearing housings. Request a quote for F3CL214N*Δ■ via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Link-Belt CL series 4-bolt flange housing is a mounted bearing that is fastened with four bolts onto a flat face, with the shaft perpendicular to the mounting surface. It is used when the bearing must be flanged to a plate, a wall or a structure, rather than supported on a foot. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, for process, conveying and power transmission equipment.

The designation starts with the letter F, which identifies the 4-bolt flange housing. It is followed by the shaft diameter in eighths of an inch: F3CL212N corresponds to a 2 1/2" shaft and F3CL220N to a 2 1/2" one... in practice, the number increases with the diameter. Then comes CL, which is the housing series, and the letter N, which indicates the insert locking type. The final suffixes, marked with an asterisk or triangle, distinguish sealing and housing configuration variants within the same series.

These housings appear in belt and chain conveyors, bucket elevators, mixers, screens, mills and process equipment. In food, cement, aggregate and effluent treatment plants they are chosen for the ease of mounting on sheet metal structures and for the possibility of aligning the shaft in the flange plane. They are also used in fans, pumps and packaging machines where side space is limited.

To select the housing, start from the shaft diameter and the load type: pure radial or combined with thrust. The CL series covers moderate load applications with a self-aligning insert. Check the sealing according to the environment: dust, water or frequent washdown require tighter seals. During mounting, rest the flange on a flat, clean surface, tighten the four bolts in a cross pattern and verify shaft alignment before securing. Lubricate according to the duty cycle and check the insert's axial clearance.

4-bolt flange housings are interchangeable between brands by shaft number, number of bolts and distance between mounting centers. The same diameter can vary in housing height and insert type, so it is advisable to compare those dimensions before replacing. If the original housing is not available, an alternative from another line with the same mounting dimensions can be used. MR Accesorios Industriales will point you to the compatible option.

Send the complete housing part number by WhatsApp, for example F3CL212N or F3CL218N, and we'll send you a quote shortly. If you need a sealing variant or a different shaft diameter within the CL series, write to us with the model you are looking for and we'll indicate the alternative. MR Accesorios Industriales, Buenos Aires, Argentina, more than 80 years supporting industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.