LINK-BELT ER47 insert bearing
- Brand
- LINK-BELT
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- ER
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Other brands in this category
Ask us about alternatives. Equivalence is verified for each reference and application.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT ER47 is a reference of insert bearing, within Bearings. Request a quote for ER47 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The LINK-BELT ER series insert bearing is a ball bearing with an extended inner ring, designed to be mounted in split or pillow block housings. It is used in equipment requiring smooth rotation and rigid support, such as conveyors, fans and agricultural machinery. MR Accesorios Industriales sells this line.
The ER series designation is read with the prefix ER followed by a number indicating the bore diameter. The number is not the diameter in millimeters, but a reference that correlates with the size. To identify the exact size, it is always advisable to consult the manufacturer's table or send us the complete part number.
These insert bearings are used in belt conveyors, bucket elevators, mixers, mills, fans and process equipment in the food, chemical, cement and agricultural industries. In Argentina, they are common in grain storage plants, meat processing plants and animal feed factories. Their design allows mounting in split housings, which facilitates maintenance and replacement without disassembling complete shafts.
To select the correct bearing, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. Sealing is key: in dusty or humid environments, choose versions with lip or double lip seals. Proper lubrication and precise housing alignment extend service life. During mounting, verify that the outer ring seats correctly and that the shaft locking system is firm.
Regarding equivalences, LINK-BELT ER series insert bearings can be interchanged with other brands that follow the same dimensional standard. Always verify tolerances and the locking type (set screw, eccentric, etc.) before replacing. MR Accesorios Industriales sells LINK-BELT, and can advise you on the compatible alternative for your equipment.
If you need a quote for a LINK-BELT ER series insert bearing, write to us on WhatsApp with the part number or shaft dimensions. At MR Accesorios Industriales we provide the quote promptly and indicate the best option for your application.
Dimensions
- Bore
- 2 15/16 in
Frequently Asked Questions
- What does the ER series mean in LINK-BELT insert bearings?
- The ER series identifies insert bearings with an extended inner ring, suitable for split housings. The number that follows indicates the bore size. For example, ER8, ER10 and ER12 correspond to different shaft sizes.
- How do I know what size insert bearing I need?
- Measure the shaft diameter where it is mounted and verify the housing type. With that data, we indicate the corresponding ER part number. If you have the old part number, send it to us and we cross-reference it with the ER series.
- Does MR Accesorios Industriales have LINK-BELT ER series insert bearings?
- Yes, we sell the LINK-BELT brand. Write to us on WhatsApp with the part number or dimensions and we will quote you promptly. We also advise you on the compatible alternative if you need another variant.