LINK-BELT EPEB225M115YFH flange bearing 4 holes

LINK-BELT EPEB225M115YFH is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for EPEB225M115YFH via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

LINK-BELT EPEB series 4-bolt flange mounted bearings are units that combine a bearing and its housing in a single assembly. This type includes part numbers such as EPEB225M110YFH, EPEB225M115YFH and EPEB225M125YFH. The part numbers differ from each other by the number that follows the letter M.

The four-bolt flange is bolted against a flat surface perpendicular to the shaft, such as the front of a machine, a frame or a closing plate. The four mounting points distribute the load and give the unit stable support. A mounted unit arrives as an assembly, which simplifies installation and replacement compared with assembling the bearing and housing separately.

The part numbers of this type have the format EPEB225M followed by a number and the YFH suffix: EPEB225M110YFH, EPEB225M115YFH and EPEB225M125YFH. What changes between them is the number after the M, and each one is a different unit. The EPEB prefix must not be confused with EPB, which corresponds to another type of unit.

Selection depends on four data points: shaft diameter, distance between mounting holes, load and working conditions. If you are replacing an existing unit, read the full part number stamped on it or take the measurements of the assembly; that is enough to identify the replacement.

During installation, clean the support and the shaft, slide the unit on without striking it and fasten it with even tightening. Check that it turns freely and without noise before starting the machine. Always follow the manufacturer's instructions for securing the unit to the shaft and for greasing it.

To request a quote, write to us by WhatsApp or email with the full part number, for example EPEB225M115YFH, and the quantity. If you have the unit you are removing, add a photo. We reply promptly, from Buenos Aires, Argentina.