LINK-BELT EPEB224M90FH flange bearing 4 holes

LINK-BELT EPEB224M90FH is a reference of flange bearing 4 holes, within Bearing housings. Request a quote for EPEB224M90FH via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The 4-bolt flange bearing of the Link-Belt B22400 series is a mounted bearing ready to be fastened to a flat surface: wall, frame or metal structure. It is used when the shaft is perpendicular to the mounting plane and rigid fastening with good load capacity is required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you on choosing the right size for your shaft and application.

The designation of these bearings is read in blocks. EPEB identifies the 4-bolt flange family; 224 corresponds to the base size of the B22400 series; the letter M that follows indicates the measurement system for the shaft diameter, and the final number is the shaft diameter in millimeters. The suffix FH distinguishes the housing and mounting configuration. Thus, for example, EPEB224M60FH is a bearing for a 60 mm shaft, and EPEB224M100FH for a 100 mm shaft. The full code identifies each variant unambiguously.

These bearings appear in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment. In food, chemical, cement and aggregate processing plants they are common because they are easy to mount on existing structures. They are also used in agriculture, in dryers and storage plants, and in the metallurgical industry. In all cases, the 4-bolt flange allows firm fastening and simple alignment with the shaft.

To select the bearing, start with the shaft diameter and the type of load: radial, axial or combined. Check that the mounting surface is flat and rigid, and that the fastening holes match the flange. Sealing is key in environments with dust, water or frequent washdowns: choose the right protection for each case. Lubrication must follow the manufacturer's recommendation and be renewed according to the working conditions. Before tightening, align the shaft with the bearing to avoid parasitic stresses and extend the service life of the bearing.

Flange mounted bearings are available from several brands with their own nomenclature. Equivalences are established by dimensions: shaft diameter, distance between holes, flange diameter and center height. It is not enough for the code to be similar: the dimensional data sheet must be compared. If you need to replace an existing bearing, send us the original code or the flange dimensions and the shaft diameter, and we will tell you the compatible alternative from Link-Belt or from another brand we sell.

MR Accesorios Industriales sells the Link-Belt line in Buenos Aires, Argentina. If you already have the code of your bearing — for example, EPEB224M75FH — or the dimensions of your shaft, write to us on WhatsApp and we will quote it promptly. We also advise you if you need a variant with another type of seal or a different configuration for your equipment.