Flange bearing 4 holes LINK-BELT EPEB224M70FH

LINK-BELT EPEB224M70FH is a flange bearing 4 holes reference, within Bearing housings. Request a quote for EPEB224M70FH via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The B22400 series 4-bolt flange bearing housing from Link-Belt is a mounted bearing ready to be fastened to a flat surface: wall, frame or metal structure. It is used when the shaft is perpendicular to the mounting plane and rigid fastening with good load capacity is required. MR Accesorios Industriales supplies this line in Buenos Aires, Argentina, and advises you to choose the correct size according to your shaft and your application.

The designation of these housings is read in blocks. EPEB identifies the 4-bolt flange family; 224 corresponds to the base size of the B22400 series; the letter M that follows indicates the measurement system for the shaft diameter, and the final number —60, 65, 70, 75, 80, 85, 90 or 100— is the shaft diameter in millimeters. The suffix FH distinguishes the housing and mounting configuration. Thus, for example, EPEB224M60FH is a housing for a 60 mm shaft, and EPEB224M100FH for a 100 mm shaft. With the complete code, each variant is identified unambiguously.

These housings appear in belt conveyors, bucket elevators, mixers, mills, centrifugal pumps and process equipment. In food, chemical, cement and aggregate processing plants they are common due to their ease of mounting on existing structures. They are also used in agriculture, in dryers and storage plants, and in the metallurgical industry. In all cases, the 4-bolt flange allows firm fastening and simple alignment with the shaft.

To select the housing, start with the shaft diameter and the type of load: radial, axial or combined. Verify that the mounting surface is flat and rigid, and that the fastening holes match the flange. Sealing is key in environments with dust, water or frequent washdowns: choose the appropriate protection for each case. Lubrication must follow the manufacturer's recommendation and be renewed according to the working conditions. Before tightening, align the shaft with the housing to avoid parasitic stresses and extend the bearing's service life.

Mounted flange bearing housings are available from several brands with their own nomenclatures. Equivalences are established by dimensions: shaft diameter, distance between holes, flange diameter and center height. It is not enough for the code to be similar: the dimensional data sheet must be compared. If you need to replace an existing housing, send us the original code or the flange dimensions and the shaft diameter, and we will indicate the compatible alternative from Link-Belt or from another brand we supply.

MR Accesorios Industriales supplies the Link-Belt line in Buenos Aires, Argentina, with more than 80 years of experience in bearings, housings and power transmission. If you already have the code for your housing —for example, EPEB224M75FH— or your shaft dimensions, write to us on WhatsApp and we will quote you promptly. We also advise you if you need a variant with a different type of seal or a different configuration for your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.