Flange bearing 4 holes LINK-BELT EPB22567YFH

LINK-BELT EPB22567YFH is a flange bearing 4 holes reference, within Bearing housings. Request a quote for EPB22567YFH via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The LINK-BELT B22500 series 4-bolt flange bearing housing is a mounted bearing ready to be fixed onto a flat surface with four bolts. It is used to support rotating shafts in equipment where rigid fastening and simple alignment are required, such as conveyor belts, mixers, pumps and fans. MR Accesorios Industriales supplies this line with technical advice so you can choose the correct size for your shaft and application.

The designation of this line is read in parts: the prefix EPB identifies the four-bolt flange housing, the numbers that follow correspond to the bearing size and the suffix YFH indicates the sealing and locking configuration. That is why references such as EPB22567YFH, EPB22571YFH or EPB22580YFH coexist: they share the B22500 series and change according to the shaft diameter they take. Send the complete code to identify the exact variant.

These housings are seen in food, water treatment, cement, mining and material handling plants. In Argentina you will find them in belt conveyors, bucket elevators, agitators, blowers and process equipment where the bearing is mounted on a flange and not on a foot. The four-bolt flange allows distributed fastening and a more stable mounting against moderate radial and axial loads.

To select correctly, take into account the shaft diameter, the type of load and the environmental conditions. The YFH sealing protects against dust and moisture, but if there is frequent washing or fine particles it is advisable to check the lubrication and the condition of the lips. When mounting, seat the flange on a clean, flat surface, tighten the bolts in a cross pattern and check shaft alignment so as not to load the bearing unevenly.

As for interchangeability, four-bolt flange housings from different brands may share mounting dimensions if the series and shaft diameter match, but it is not advisable to rely only on the code. Always compare the flange dimensions, the distance between holes and the shaft diameter before replacing. If you need an equivalent, write to us with the original code and we will indicate the compatible alternative.

MR Accesorios Industriales supplies the LINK-BELT line with the technical backing of more than 80 years in the field. If you have doubts about which reference goes on your equipment, send the code or a photo of the housing by WhatsApp and we will quote it shortly.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.