Product page
Pillow block bearing LINK-BELT EPB224M55H
- Manufacturer Part Number
- EPB224M55H
- Brand
- LINK-BELTOfficial brand
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- B224
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT EPB224M55H is a pillow block bearing reference, within Bearing housings. Request a quote for EPB224M55H via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
Link-Belt B224 series pillow blocks are mounted pillow block bearings, with split housing and inserted bearing, used to support rotating shafts in transmission equipment. They are mounted on flat bases and allow shaft alignment with tolerance, as well as facilitating bearing replacement without disassembling the line. MR Accesorios Industriales sells them in Buenos Aires, Argentina, with technical advice to choose the correct size.
The designation of these pillow blocks is read in blocks: EPB identifies the pillow block line, 224 corresponds to the B224 series and M indicates the mounting sleeve fastening type. The number following the M is the shaft diameter in millimeters, and the final H indicates the housing configuration. Therefore, references such as EPB224M35H or EPB224M70H cover shafts from 35 to 70 mm within the same family.
In Argentine industry they are seen in aggregate conveyors, mills, mixers, packaging belts and process equipment. They also appear in centrifugal pumps, fans and gear reducers where a robust and easy-to-maintain support is needed. Being pillow blocks, they are bolted to beds or metal structures and accept small misalignments typical of mounting. They are common in food, chemical and material processing plants.
To choose well, take into account the shaft diameter, load type and environmental conditions. The pillow block seal defines protection against dust and humidity: in dirty environments an additional barrier is advisable. Lubrication must be the one indicated for the inserted bearing, and mounting on a rigid base prevents deformation. Initial alignment and tightening of the fastening bolts are key for the assembly to work without vibrations.
B224 pillow blocks are interchangeable with other brands that use the same series and shaft diameter nomenclature. When requesting a quote, it is advisable to provide the complete code and, if possible, the shaft and base hole dimensions. MR Accesorios Industriales will indicate the compatible alternative or, if necessary, manufacture it to measure. Write to us on WhatsApp with the model you need and we will quote it promptly.
This description provides guidance on the product type. Check the configuration and dimensions of this reference.
Dimensions
Dimensions and tolerances: Send us the part number via WhatsApp and we'll confirm dimensions, sealing, and internal clearance against the manufacturer's data sheet.
Frequently Asked Questions
- How do I know which B224 pillow block I need?
- Measure the shaft diameter where it is mounted and check the complete code of the old pillow block. With that data we will indicate the exact reference within the B224 series and quote it on WhatsApp.
- Can it be mounted on any base?
- You need a flat and rigid surface, with holes aligned to the pillow block. The base must support the equipment loads and allow bolt adjustment. If you have doubts, send us a sketch and we will advise you.
- What lubrication do these pillow blocks require?
- The inserted bearing is lubricated with general-purpose bearing grease. The frequency depends on speed and environment. Follow the equipment manufacturer's recommendation and check the seal condition.