LINK-BELT EPB224M35H pillow block bearing

LINK-BELT EPB224M35H is a reference of pillow block bearing, within Bearing housings. Request a quote for EPB224M35H via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

Link-Belt B224 series pillow blocks are mounted pillow block bearings, with split housing and inserted bearing, used to support rotating shafts in transmission equipment. They are mounted on flat bases and allow shaft alignment with tolerance, as well as facilitating bearing replacement without disassembling the line. MR Accesorios Industriales sells them in Buenos Aires, Argentina, with technical advice to choose the correct size.

The designation of these pillow blocks is read in blocks: EPB identifies the pillow block line, 224 corresponds to the B224 series and M indicates the mounting sleeve fastening type. The number following the M is the shaft diameter in millimeters, and the final H indicates the housing configuration. Therefore, references such as EPB224M35H or EPB224M70H cover shafts from 35 to 70 mm within the same family.

In Argentine industry they are seen in aggregate conveyors, mills, mixers, packaging belts and process equipment. They also appear in centrifugal pumps, fans and gear reducers where a robust and easy-to-maintain support is needed. Being pillow blocks, they are bolted to beds or metal structures and accept small misalignments typical of mounting. They are common in food, chemical and material processing plants.

To choose well, take into account the shaft diameter, load type and environmental conditions. The pillow block seal defines protection against dust and humidity: in dirty environments an additional barrier is advisable. Lubrication must be the one indicated for the inserted bearing, and mounting on a rigid base prevents deformation. Initial alignment and tightening of the fastening bolts are key for the assembly to work without vibrations.

B224 pillow blocks are interchangeable with other brands that use the same series and shaft diameter nomenclature. When requesting a quote, it is advisable to provide the complete code and, if possible, the shaft and base hole dimensions. MR Accesorios Industriales will indicate the compatible alternative or, if necessary, manufacture it to measure. Write to us on WhatsApp with the model you need and we will quote it promptly.