Flange bearing 4 holes LINK-BELT DKLFM02E20SP

LINK-BELT DKLFM02E20SP is a flange bearing 4 holes reference, within Bearing housings. Request a quote for DKLFM02E20SP via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The 4-bolt flange bracket of the Duralon series is a mounted bearing unit ready to install on structures with a flat face. It is fastened with four screws and houses the bearing in a spherical housing that allows small misalignments to be compensated. It is used in conveying equipment, material handling and general machinery, where a robust unit with simple mounting is needed. MR Accesorios Industriales carries it in Buenos Aires, Argentina.

The Duralon series designation combines letters and numbers that identify the bracket type and its size. In DKLFM02E20SP, the initial letters indicate the 4-bolt flange configuration; the number that follows the main letters indicates the nominal shaft diameter, and the final suffix distinguishes sealing or material variants. To choose the correct code, the most practical thing is to pass the shaft diameter and the mounting type: with that we will indicate the exact reference.

These brackets are seen in belt conveyors, bucket elevators, mixers, screens and process equipment. Also in food, cement, mining and aggregate processing plants, where dust and moisture demand units with good sealing. Being flange type, they are bolted to sheet or structure and remain accessible for inspection. In Argentina they are widely used by the food industry and grain logistics.

To select, first look at the shaft diameter and the load it will support. Check that the flange has holes compatible with your structure and that the bearing allows the angular compensation the equipment needs. During mounting, rest the flange perfectly flat, tighten the screws in a cross pattern and check alignment before starting up. Lubrication and the type of sealing are chosen according to the environment: dust, water or frequent washdowns.

Flange-mounted brackets are available from several brands with similar nomenclatures, but they are not always interchangeable: hole spacing, center height and sealing type vary. That is why it is advisable to compare the shaft size, the hole diameter and the center-to-center distance before replacing. If you pass us the original code or a photo of the part, we will indicate the alternative compatible with your equipment.

If you need this Duralon flange bracket or a similar variant, write to us on WhatsApp with the code or the model that appears on the part. At MR Accesorios Industriales we will quote you promptly and advise you so that the unit fits without problems in your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.