LINK-BELT CHBS224E hanger bearing

LINK-BELT CHBS224E is a reference of hanger bearing, within Bearing housings. Request a quote for CHBS224E via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The Link-Belt CHBS series hanger bracket is a mounted bearing that attaches to an overhead structure to support and guide drive shafts in motion. It is used when the shaft needs an intermediate support point, for example in screw conveyors, cardan shafts or long drive lines. MR Accesorios Industriales sells this line and advises you on choosing the correct part number according to the shaft diameter and the type of mounting.

The CHBS designation is read in parts: CH identifies the hanger bracket family, B indicates the split housing type and S the mounting configuration. The number that follows corresponds to the bearing size and is related to the shaft diameter. The final letter E indicates a construction variant within the series. With that data you can locate the exact part number in the catalog and order it on WhatsApp.

These brackets are found in food, cement, mining and aggregate processing plants, especially in screw conveyors and drive shafts that need support at intervals. They also appear in continuous process equipment where the shaft works with moderate radial load and requires constant alignment. In Argentina they are found in grinding, mixing and bulk material handling lines, where the robustness of the mounting and the possibility of regreasing are key to production continuity.

To select the bracket, take into account the shaft diameter, the radial load and the rotation speed. Hanger mounting requires that the support structure be rigid and that the shaft be aligned with the neighboring support points. Check the sealing: if there is dust or moisture, additional protection is advisable. Lubrication must be the one indicated for the inner bearing and renewed according to the duty cycle. The CHBS series allows regreasing and that helps extend service life in demanding environments.

As for equivalents, hanger brackets from different brands are compared by shaft diameter, housing type and mounting configuration. It is not enough for the part number to be similar: dimensions and mounting method must be cross-referenced. At MR Accesorios Industriales we indicate the compatible alternative. It is always advisable to send a photo or the assembly drawing to avoid interchange errors.

If you need a Link-Belt CHBS hanger bracket, write to us on WhatsApp with the full part number or the shaft diameter. At MR Accesorios Industriales we quote you promptly and, if needed, help you confirm the correct variant for your application. We can also advise you on mounting and lubrication so the bracket works under optimal conditions.