LINK-BELT CB224M45H cartridge bearing

LINK-BELT CB224M45H is a reference of cartridge bearing, within Bearing housings. Request a quote for CB224M45H via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The LINK-BELT B22400 series cartridge bearing is a mounted bearing ready to install on a wall or structure, with two mounting holes and a housing that protects the bearing and retains lubricant. It is used in equipment where the shaft must be supported and aligned without building a housing from scratch. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and can quote the exact part number you need on WhatsApp.

The designation of these housings is read in blocks. In CB224M25H, the letters CB identify the cartridge bearing family; 224 corresponds to the B22400 series; the M indicates the locking type or housing configuration; the number that follows indicates the shaft diameter for which the bore is machined; and the final H distinguishes a construction variant within the same series. With those data the housing can be ordered without ambiguity.

These housings appear in belt conveyors, bucket elevators, mixers, mills, screens and process equipment in food, chemical and aggregate plants. In Argentina they are seen in packaging lines, plant conveyor belts and agricultural machinery. The advantage is that they concentrate the bearing, sealing and mounting in a single part, which simplifies assembly and replacement in equipment where access is limited.

To choose correctly, take into account the shaft diameter, the type of load and the environmental conditions. The cartridge sealing defines how much contamination it tolerates: in dusty or wet environments a variant with a reinforced seal is advisable. Lubrication must be the one specified for the working speed, and alignment between the two shaft housings is key so the bearing does not work under strain. If the equipment vibrates, check the mounting and the housing adjustment.

Cartridge bearings of this series are interchangeable between brands according to the dimensional standard and shaft diameter, but not all suffixes match. Before replacing one piece of equipment with another, compare the shaft diameter, the distance between holes, the center height and the sealing type. The equivalent can be found by those measurements. MR Accesorios Industriales will indicate the compatible alternative.

Send the full part number on WhatsApp, for example CB224M30H, or the measurements of the housing you need. With that we will quote shortly and confirm the variant that corresponds to your equipment. If you have doubts about the suffix or the shaft diameter, send us a photo of the plate or the old housing and we will identify it together.