LINK-BELT 3222FXT1 flange bearing 2 holes
- Brand
- LINK-BELT
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 3200
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
LINK-BELT 3222FXT1 is a reference of flange bearing 2 holes, within Bearing housings. Request a quote for 3222FXT1 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The LINK-BELT 2-bolt flange bracket is a mounted bearing ready to be fastened onto flat structures. It is used to guide shafts in equipment where space is limited and front mounting with two anchor points is required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and helps you choose the correct variant for your application.
These brackets are found in belt conveyors, bucket elevators, mixers, mills and process equipment in food, chemical and aggregate plants. In Argentina, they are common in the oilseed industry, grain processing plants and packaging lines. Their two-bolt flange allows them to be mounted on folded sheet metal or profile structures, with simple alignment and quick access for maintenance.
To select the bracket, take into account the shaft diameter, the type of load (radial, axial or combined) and the environmental conditions. If there is dust, water or frequent washdowns, choose the variant with better sealing. Proper lubrication and careful alignment of the mounting holes extend bearing life. Mount on a flat surface and check axial clearance after tightening the bolts.
LINK-BELT brackets can be interchanged with other brands of 2-bolt flange mounted bearings, as long as the mounting dimensions, shaft diameter and sealing type match. It is not enough for the part number to be similar: you must compare the hole spacing, the diameter of the mounting circle and the center height. If you have doubts, send us the measurements or the equipment reference and we will indicate the compatible alternative.
If you need a flange bracket for your machine, write to us on WhatsApp with the part number or model you are looking for. At MR Accesorios Industriales we quote promptly and advise you so that the part works correctly from the first installation.
Dimensions
- Bore
- 1 3/8 in
Frequently Asked Questions
- What does the suffix 1 or 3 mean in part numbers such as 3210FXT1 and 3210FXT3?
- The final suffix indicates sealing or housing material variants. The 1 usually corresponds to a standard seal and the 3 to a version with greater protection against dust and water. To choose, consider the conditions of your equipment and ask us on WhatsApp.
- How do I know what bracket size I need for my shaft?
- You need to measure the shaft diameter and the distance between the mounting holes. With that data and the part number of the old bracket, we quote the equivalent part. If you do not have the part number, send us a photo and the measurements on WhatsApp.
- Can LINK-BELT brackets be replaced by another brand?
- Yes, as long as the mounting dimensions, shaft diameter and sealing type match. It is not enough for the part number to be similar. Compare the hole spacing and the center height, or ask us and we will indicate the compatible alternative.