LINK-BELT 23284LBKC3 spherical roller bearing
- Brand
- LINK-BELT
- Category
- Bearings
- Subcategory
- Spherical roller bearings
- Series
- 23200
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read LINK-BELT 23284LBKC3
- 232Series
- Spherical roller bearings, 232 series. For the same bore, each series has a different outside diameter and width.
- 84Bore
- 420 mm bore: 84 × 5.
- LBKC3Suffix
- LINK-BELT suffix: it defines the variant (sealing, cage, internal clearance or other features).
23284 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The LINK-BELT 23284LBKC3 bearing has a 420 mm bore, a 760 mm outside diameter and a 272 mm width (420 x 760 x 272 mm).
LINK-BELT 23284LBKC3 is a reference of spherical roller bearing, within Bearings. Request a quote for 23284LBKC3 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The LINK-BELT 22200 series spherical roller bearing is a self-aligning component with two rows of rollers, designed to withstand high radial loads and angular misalignment between shaft and housing. It is used in rotating equipment where the shaft may flex or the mounting is not perfectly coaxial. MR Accesorios Industriales carries this line with the same technical assistance as always: send us the part number and we will quote it.
The 22200 series designation reads as a size and variant code. The first digits indicate the dimension series; the following number defines the bore diameter. The LBK suffix identifies the LINK-BELT execution and the final letter C corresponds to an internal clearance greater than standard, intended for mountings with tight fits or high operating temperatures. Examples such as 22209LBKC3, 22210LBKC3 or 22216LBKC3 show how the size changes while keeping the same designation scheme.
These bearings are used in belt conveyors, vibrating screens, mills, mixers, gearboxes and continuous process equipment. In the Argentine industrial sector they appear in food, cement, mining, chemical and aggregate processing plants, where sustained rotation and variable loads demand a robust, easy-to-maintain bearing. The self-aligning capability compensates for small misalignments without penalizing service life.
To select correctly, consider the radial and axial load, the rotation speed and the type of sealing required according to the environment. Mounting must be done with suitable tools, avoiding direct blows on the rings. Lubrication, with grease or oil depending on the application, and careful alignment of the shaft with respect to the housing are key to maximizing service life. The C3 internal clearance facilitates mounting with interference fits.
As for equivalents, spherical roller bearings from different brands can be interchanged if the main dimensions, load capacity and sealing configuration match. It is always advisable to verify the full part number and tolerances before replacing. LINK-BELT is a brand that MR carries, and we can guide you to find the right reference within the line.
If you need a LINK-BELT 22200 series spherical roller bearing, message us on WhatsApp with the part number or the measurements. At MR Accesorios Industriales we will quote you promptly and point you to the compatible alternative if needed.
Dimensions
Boundary dimensions of the basic designation 23284 per ISO 15: 420 x 760 x 272 mm (d x D x B).
- Bore
- 420mm
- Outside diameter (D)
- 760mm
- Width (B)
- 272mm
Same size in SKF and other brands
Pages from other brands with the basic designation 23284: 420 x 760 x 272 mm (d x D x B) per ISO 15.
- Looking for the SKF 23284? We also quote:23284 CAK/W3323284 CAK/C3W33
- FAG23284-BEA-XL-MB123284-BEA-XL-K-MB1
- NSK23284CAME423284CAMKE4
- NTN23284B23284BK
- RKB23284
- TIMKEN23284YMB
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the LINK-BELT 23284LBKC3 bearing?
- The LINK-BELT 23284LBKC3 bearing has a 420 mm bore, a 760 mm outside diameter and a 272 mm width (420 x 760 x 272 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation 23284.
- What does the LBKC3 suffix mean on a LINK-BELT bearing?
- LBK identifies the LINK-BELT execution and C3 indicates a radial internal clearance greater than standard. This is useful when the mounting has tight fits or when the bearing operates at high temperatures, since it compensates for thermal expansion.
- How do I choose the right spherical roller bearing for my equipment?
- You need to know the radial and axial load, the speed, the shaft diameter and the environmental conditions. With that data we advise you to select the correct series and sealing. Message us on WhatsApp and we will quote the exact reference.
- What care does mounting a spherical roller bearing require?
- It must be mounted with pullers or presses, without striking the rings, and the alignment between shaft and housing must be verified. Lubrication must be as specified and the fit correct. Careful mounting prevents premature failures and extends service life.