Y-bearing (insert bearing) INA UK216

INA UK216 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for UK216 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The UK series Y-bearing insert is an insert bearing with a tapered bore and adapter sleeve mounting system, designed to be mounted in split or pillow block housings. It is used in equipment requiring a bearing unit that is easy to install and remove, with good alignment capability. MR Accesorios Industriales supplies this INA line in Buenos Aires, Argentina, with technical advice to select the correct part number for your application.

The UK series designation is read with the prefix UK followed by a three-digit number indicating the bore diameter of the adapter sleeve. For example, UK205 corresponds to a bearing with a tapered bore for a 25 mm sleeve, UK206 for 30 mm, UK207 for 35 mm, and so on up to UK212 for 60 mm. The UK suffix identifies the adapter sleeve mounting type, which allows the bearing to be mounted on unmachined shafts and the axial position to be adjusted.

These bearings are used in a wide variety of industrial applications in Argentina: belt conveyors, bucket elevators, mixers, mills, equipment for the food, textile, chemical and process industries. They also appear in agricultural machinery, fans and transmission systems where a robust, easy-to-maintain support is required. Their insert design makes field replacement easy without dismantling the entire assembly.

To select the UK Y-bearing insert, take into account the shaft diameter, the housing type (split, pillow block, flange) and the operating conditions: load, speed and environment. Mounting is done with an adapter sleeve, which requires careful cleaning of the shaft and correct tightening of the lock nut to avoid play. Proper lubrication and sealing against dust and moisture extend service life. Check the alignment of the housing to avoid additional loads.

Regarding equivalents, Y-bearing inserts with a tapered bore and adapter sleeve are available from different brands under similar designations, although they are not always directly interchangeable. Factors such as dimensions, tolerances and mounting system may vary. If you need to replace an existing bearing, the safest approach is to compare the main dimensions and consult a specialist. At MR Accesorios Industriales we can help you find the right alternative within our product line.

If you already have the part number of the bearing you need, write to us on WhatsApp and we will quote you shortly. We can also advise you if you are assembling new equipment or if you have doubts about the designation. At MR Accesorios Industriales we have more than 80 years of experience in the field and we support you in selecting the correct component for your application.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.