Y-bearing (insert bearing) INA RABRA30/62-XL-FA106

INA RABRA30/62-XL-FA106 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for RABRA30/62-XL-FA106 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The Y-bearing or insert is a bearing unit with a spherical outer ring and one or two extensions that allow it to be fixed to the shaft. It is used in equipment where the bearing is housed in a split or pillow block housing, and needs some alignment capability. The INA RABRA-XL-FA series covers metric and inch sizes, with sealing and screw fixing. MR Accesorios Industriales sells it in Buenos Aires, Argentina.

The RABRA-XL-FA designation is read in blocks: RABRA identifies the family of Y-bearings with spherical outer ring and screw fixing; XL indicates the current design generation; FA defines the type of sealing and the extensions. The number following RABRA, as in RABRA30/62-XL-FA106, gives the shaft diameter and the outer diameter: in that example, 30 mm shaft and 62 mm outer. The final numeric suffixes distinguish sealing or fixing variants within the same series.

These bearings are mounted in split, pillow block or flanged housings, and appear in conveyors, belts, elevators, mixers, mills and process equipment. In Argentina they are common in food plants, cement plants, paper mills and agriculture, where dust and humidity demand reliable sealing. They are also used in fans and horizontal shaft pumps. The combination with standard housings allows replacing the insert without changing the housing.

To choose correctly, check the shaft diameter and the bearing outer diameter, and the type of fixing: set screws on the inner ring are the most widespread, but there are also systems with taper sleeve. The FA sealing protects against dust and splashes; if the environment is very humid or with frequent washdowns, it is advisable to check the lubrication and the condition of the lips. When mounting, align the housing and tighten the screws evenly to avoid deforming the inner ring.

Regarding interchangeability, Y-bearings are identified by metric or inch dimensions and by the type of fixing, not by each manufacturer's code. An insert from another brand with the same shaft diameter, outer diameter and width may be equivalent, but always check the sealing and the shape of the extensions. There is no universal table: equivalence is confirmed by comparing drawings or measuring the part. If in doubt, send us the measurements and the code engraved on the bearing.

MR Accesorios Industriales sells the INA brand as part of its line of bearings and mounting accessories. If you need the RABRA-XL-FA for a specific equipment, write to us by WhatsApp with the full code or the shaft and housing measurements. We will quote you shortly and help you confirm the correct variant.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.