Support roller INA PWKRE35-2RS-XL

INA PWKRE35-2RS-XL is a cam follower and support roller reference, within Bearings. Request a quote for PWKRE35-2RS-XL via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The INA PWKRE RS-XL series support roller is a cylindrical roller bearing with a thick-walled outer ring, designed to withstand high radial loads and transmit them onto raceways. It is used as a cam or support roller in guiding systems, cams and lifting mechanisms. Its design with RS sealing and the INA XL designation make it suitable for environments with dust and permanent lubrication.

The PWKRE RS-XL designation is read in blocks. The letters PWKRE identify the series of support rollers with a thick-walled outer ring and inner shaft. The number that follows, as in PWKRE35-2RS-XL or PWKRE90-2RS-XL, indicates the shaft diameter or the roller's nominal size. The 2RS suffix indicates double contact sealing, and XL corresponds to INA's higher load capacity execution. With this data you can locate the exact part within the series.

These rollers are used in drive cams, linear guides, conveyors, machine tools, presses and lifting equipment. In Argentine industry they appear in packaging lines, conveyor belts, road machinery and agricultural equipment. Their thick outer ring allows them to roll directly on a cam track or guide, absorbing high radial loads and shocks typical of reciprocating motion.

To select the roller, take into account the shaft diameter, the outer ring width and the type of sealing. The 2RS execution protects against dust and moisture, but requires adequate lubrication and careful alignment to avoid damaging the lips. Assembly is done with an interference fit on the shaft; avoid impacts on the outer ring. Lubrication can be permanent or relubricable depending on use, and the raceway must be ground and hardened.

INA support rollers can be interchanged with those from other European brands that follow the same dimensional nomenclature, such as SKF or FAG, as long as the dimensions and type of sealing match. There is no automatic equivalence between series: diameter, width, load and fastening must be verified. If the part number does not match, it is advisable to compare drawings or samples. At MR Accesorios Industriales we advise you to find the equivalent part.

If you need a quote for an INA PWKRE RS-XL support roller, send the full part number via WhatsApp. At MR Accesorios Industriales we review the inquiry and respond shortly with the information you need for your equipment.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.