Support roller INA LR206-2RS

INA LR206-2RS is a cam follower and support roller reference, within Bearings. Request a quote for LR206-2RS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The INA LR series support roller is a rolling component with an integrated stud that mounts directly onto a surface to guide or support radial loads in motion. It is used in conveyor systems, cams and guides where robust, low-friction rolling is required. Its compact, sealed design makes it suitable for environments with moderate dust or dirt. MR Accesorios Industriales carries this line as an official brand, with technical advice to choose the right variant.

The LR series designation is read in blocks: the letters identify the support roller family, the number that follows indicates the size or outer raceway diameter, and the suffixes provide design features. For example, in LR206-2RS the 206 refers to a standard metric size, while 2RS indicates double rubber sealing. The LR206-X-2RS variant includes an X that distinguishes a special design within the same size. The codes LR5000-2RS and LR5001-2RS correspond to support rollers with a larger diameter, intended for higher loads. Knowing these suffixes lets you order the correct replacement without ambiguity.

In Argentine industry, INA LR series support rollers are found in belt and roller conveyors, packaging machines, material handling equipment and linear guide systems. They also appear in the food industry, where the sealing prevents the ingress of debris, and in agricultural applications on seeders and harvesters. Their ability to withstand radial loads and a certain amount of misalignment makes them common in assemblies where perfect alignment cannot be guaranteed. MR Accesorios Industriales carries them for replacement and new projects.

To select the right roller, take into account the outer diameter, the width and the type of mounting the shaft accepts. The 2RS sealing protects against dust and moisture, but if the environment is very aggressive, additional seals should be evaluated. Factory lubrication is sufficient for most applications; for high speeds or temperatures, ask about a compatible grease. Mounting must be done on a clean, flat surface, with the recommended tightening torque to avoid deformation. Careful alignment extends the roller's service life and reduces noise.

As for equivalents, support rollers are identified by their dimensional designation and are not always interchangeable between manufacturers. The same size may vary in seal type, internal clearance or load capacity. If you need to replace a roller from another brand, the safest approach is to compare the critical dimensions and the operating conditions. At MR Accesorios Industriales we can guide you with the INA designation or with the measurements of the original roller. Interchangeability must be validated case by case so as not to compromise equipment performance.

If you already have the part number of the INA LR series support roller you need, write to us on WhatsApp and we will quote you shortly. You can also send us a photo or the measurements of the component if you do not have the reference. Our technical team helps you identify the correct variant within the LR line, including the sealed designs and the larger-diameter ones. With more than 80 years in the business, at MR Accesorios Industriales we know the applications of these rollers in Argentine industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.