Drawn cup needle roller bearing INA HK1416-2RS

INA HK1416-2RS is a needle roller bearing reference, within Bearings. Request a quote for HK1416-2RS via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The INA HK RS series needle bushing is a radial bearing with a very small cross-section: a cage with needles mounted directly on the shaft, without an inner ring. It is used when radial space is limited and high load capacity is required. MR Accesorios Industriales supplies this INA line in Buenos Aires, Argentina, and helps you choose the right part number for your application.

The HK RS series designation is read as follows: HK indicates a thin-walled needle bushing; the following numbers define the shaft diameter and the width. For example, HK0810-2RS corresponds to a bushing for an 8 mm shaft and 10 mm width, while HK1012-RS is for a 10 mm shaft and 12 mm width. The suffix RS indicates single sealing, and 2RS double sealing, with an elastomer lip on each side. These seals protect against dust and moisture, and retain lubrication.

They are common in applications where space is critical: belt and chain drives, pumps, compressors, textile machines, packaging equipment and power tools. In Argentine industry they are found in conveyor rollers, road machinery, agricultural implements and material handling equipment. Their low profile makes it possible to replace bronze bushings or friction bushings with a needle solution that reduces wear and improves efficiency.

To select the right bushing, take into account the shaft diameter, the available width and the type of sealing. The single RS series is suitable for environments with moderate dust; the 2RS offers better protection in the presence of moisture or particles. Mounting is done by pressing into the housing, with the shaft ground and lubricated. It is essential to ensure correct alignment and avoid axial loads, since this type of bearing is designed for radial loads.

As for equivalents, needle bushings with metric dimensions are usually interchangeable between manufacturers that follow the same dimensional standards. However, always verify the full part number and tolerances, because sealing or internal clearance may vary. MR Accesorios Industriales supplies INA as an official brand, and can advise you on alternatives if you need an equivalent reference.

If you already have the part number of the bushing you need, send it on WhatsApp to MR Accesorios Industriales and we will quote you promptly. If you are not sure of the designation, tell us the shaft and housing dimensions, and the type of application, and we will help you identify it.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.