Drawn cup needle roller bearing INA HK1216

INA HK1216 is a needle roller bearing reference, within Bearings. Request a quote for HK1216 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The INA HK series needle bushing is a radial needle roller bearing with a drawn outer ring and no inner ring. It is used when the shaft acts directly as the raceway and radial space is limited. Its compact design allows it to be mounted in machined housings with an interference fit, and it is common in applications requiring high load capacity in a small volume. MR Accesorios Industriales carries this line as an official brand, with technical support to select the correct part number.

The HK series designation is read by numbers: the first two indicate the shaft diameter in millimeters and the next two the width of the bushing. For example, HK0408 fits a 4 mm shaft with 8 mm width; HK0810 corresponds to an 8 mm shaft and 10 mm width. In the examples HK0606, HK0608 and HK0609, only the width changes for the same shaft diameter. This logic allows you to quickly identify the size you need without a table.

In Argentine industry, INA HK series needle bushings are used in transmissions, pumps, compressors, machine tools and packaging equipment. They also appear in conveyor rollers, joints and lifting mechanisms. Since they have no inner ring, the shaft must have adequate hardness and be ground to function as a raceway. They are common in repairs where space is critical and bushings are being replaced with needle roller bearings.

To select the bushing, verify the shaft diameter and tolerance, the available width and the type of load. Mounting is done by pressing into the housing, with tooling that does not deform the drawn cup. Lubrication can be grease or oil depending on the environment; in contaminated applications, consider external seals or versions with a seal. Alignment between shaft and housing is key to avoid edge loads. If the shaft is not hardened, it is advisable to use a version with an inner ring.

Needle bushings are interchangeable between manufacturers by dimensional part number: the same shaft diameter and width usually has equivalents in other brands. However, verify tolerances, load capacity and type of drawn cup before replacing. INA is a reference in this family, and MR Accesorios Industriales carries the line as an official brand. For equivalents, the safest approach is to compare the complete designation and consult with the supplier.

If you need an INA HK series needle bushing, send us the part number or the shaft and width measurements via WhatsApp. At MR Accesorios Industriales we help you confirm the correct variant and resolve the quote promptly. We can also advise you on mounting and lubrication so the repair goes well the first time.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.