INA GYE65-214-XL-KRR-B y-bearing (insert bearing)

INA GYE65-214-XL-KRR-B is a reference of y-bearing (insert bearing), within Bearings. Request a quote for GYE65-214-XL-KRR-B via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The INA GYE-XL-KRR-B Y-bearing is an insert with a spherical outer ring and set screw locking, designed to be mounted in split plummer block or flanged housings. It is used for rotating shafts in equipment where alignment is not perfect and firm securing is required. MR Accesorios Industriales sells this INA line in Buenos Aires, Argentina, in bearings and power transmission.

The designation GYE-XL-KRR-B reads as follows: GYE identifies the series of inserts with spherical outer ring and set screw locking; XL indicates the version with longer service life and lower friction; KRR indicates double-lip sealing with additional protection; B corresponds to a design variant of the inner ring. The examples GYE12-XL-KRR-B, GYE15-XL-KRR-B, GYE20-XL-KRR-B and GYE30-XL-KRR-B show that the central number is related to the shaft diameter: the higher the number, the larger the diameter. To choose the correct part number, measure the shaft and check the housing series.

These inserts are used in belt conveyors, bucket elevators, mixers, mills, packaging lines and process equipment in food, chemical and aggregate plants. In Argentina, they are common in the oilseed, meatpacking and cement industries, where environments with dust, moisture or frequent washdowns require reliable sealing. They are also used in agricultural machinery and industrial ventilation systems. The combination with split plummer block or flanged housings allows the insert to be replaced without completely disassembling the shaft.

To select the insert, consider the shaft diameter, the type of load (radial, axial or combined) and environmental conditions. KRR sealing protects against dust and splashes, but if there is immersion or pressure washing, additional covers should be evaluated. Factory lubrication can be replenished according to the duty cycle; in high-speed applications, check internal clearance and housing alignment. Mounting is done with the set screws on the inner ring, tightening to the recommended torque so as not to deform the shaft. Careful alignment extends bearing life.

INA Y-bearings are interchangeable with those of other European brands that use similar designations, such as the GYE, GRA, RA or YAR series, as long as dimensions and locking type match. In the local market, equivalences between INA, FAG, SKF and NSK are common. To replace an insert, the safest approach is to compare shaft diameter, overall width, distance between screws and sealing type. MR Accesorios Industriales can guide you with the equivalence if you provide the original part number.

If you need an INA GYE-XL-KRR-B Y-bearing, write to us on WhatsApp with the complete part number or the shaft and housing dimensions. At MR Accesorios Industriales we will reply shortly with the quote. We can also advise you on mounting and the right lubrication for your application.