Y-bearing (insert bearing) INA GVKE30-211-KTT-B-AS2/V

INA GVKE30-211-KTT-B-AS2/V is a y-bearing (insert bearing) reference, within Bearings. Request a quote for GVKE30-211-KTT-B-AS2/V via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The INA Y-bearing of the GVKE KTT-B-AS/V series is an insert with a spherical outer ring and a screw locking system, designed to be mounted in split or pillow block housings. It is used in equipment where the shaft is already machined and a self-aligning radial unit with easy mounting and dismounting is required. It is a common solution in light and medium-duty drives in Argentine industry.

The designation of these Y-bearings is read in blocks. GVKE identifies the variant with a spherical outer ring and screw locking; KTT indicates the sealing type and the geometry of the insert; B refers to the inner ring design; AS defines the locking system on the shaft; and the suffix /V indicates a particular construction variant. A specific example is GVKE30-211-KTT-B-AS2/V, where the central number is linked to the shaft diameter and the code 211 to the insert size. To request a quote, send the full part number exactly as it appears on the equipment.

These Y-bearings are used in belt conveyors, bucket elevators, mixers, fans and process equipment in food, chemical and aggregate plants. In Argentina they are common in packaging lines, packing conveyor belts and agricultural machinery. Their spherical outer ring compensates for small misalignments between the shaft and the housing, which simplifies mounting on welded structures and reduces fine adjustment on site.

To select the correct insert, check the shaft diameter and tolerance, the locking type (screws on the inner ring) and the sealing required according to the environment: dust, water or washdown. Mounting is done by sliding the insert onto the machined shaft and tightening the locking screws with the corresponding wrench. It is important to lubricate according to the duty cycle and to check the alignment of the housing so as not to load the seal. If the equipment runs with vibration, check the tightness periodically.

Regarding equivalences, Y-bearings are interchanged between manufacturers by dimensional code and locking type, but not all suffixes match. An insert with screw locking can replace another of similar dimensions if the shaft diameter, inner ring width and sealing are compatible. To confirm interchangeability, it is advisable to compare the main dimensions and the housing type. MR Accesorios Industriales sells INA as an official brand and can guide you with the exact part number.

If you have the part number of the Y-bearing you need, send it by WhatsApp to MR Accesorios Industriales along with a photo of the housing or the shaft. With that data the GVKE KTT-B-AS/V variant is identified and we reply as soon as possible. You can also ask about other Y-bearing brands if the equipment already has a defined replacement.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.