Y-bearing (insert bearing) INA GVK108-211-KTT-B-AS2/V

INA GVK108-211-KTT-B-AS2/V is a y-bearing (insert bearing) reference, within Bearings. Request a quote for GVK108-211-KTT-B-AS2/V via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The INA GVK KTT-B-AS/V Y-bearing is an insert bearing with a spherical outer ring and set screw locking system, designed to be mounted in split or solid housings. It is used in equipment where the shaft rotates and needs support with flexible alignment, such as conveyors, mixers or agricultural machinery. MR Accesorios Industriales supplies this INA line in Buenos Aires, Argentina, and advises you on choosing the correct variant for your application.

The designation GVK KTT-B-AS/V is read in blocks: GVK identifies the insert series with spherical outer ring and set screw locking; KTT indicates the double-lip seal with additional protection; B corresponds to the inner ring design; AS defines the set screw locking system on the inner ring; and /V indicates an execution variant. The examples GVK100-208-KTT-B-AS2/V and GVK108-211-KTT-B-AS2/V show how the shaft diameter and the housing series number are combined. To request a quote, send us the full part number exactly as it appears on your equipment.

In Argentine industry, these inserts are found in belt conveyors, bucket elevators, mixers, dryers and equipment for aggregates or grain. They also appear in road machinery, agricultural machinery and packaging lines. The combination of a spherical outer ring and a split housing compensates for slight shaft misalignment, which is common in equipment subject to vibration or mounted on welded structures. MR Accesorios Industriales has more than 80 years of supporting plants and workshops in Buenos Aires, Argentina, with power transmission components and bearings.

To select the correct insert, take into account the shaft diameter, the locking type (set screws or eccentric), the sealing required for the environment (dust, moisture, washdowns) and the operating temperature. Mounting must be done on a shaft with the proper tolerance and free of burrs; tighten the set screws with the corresponding wrench and verify that the outer ring seats correctly in the housing. Factory lubrication is usually sufficient for the service life, but in severe environments relubrication should be considered. If in doubt, consult us with the part number and the type of equipment.

Y-bearings from different brands are interchangeable if the main dimensions, locking type and sealing match. INA, SKF, FAG, NTN or NSK offer equivalent lines, but the suffixes change by manufacturer and may modify the sealing or locking. Do not replace an insert based only on the shaft diameter: also verify the overall width, the shape of the outer ring and the locking system. If you need an equivalent, send us the original part number and we will help you find the right option within what we supply.

Do you need this INA GVK KTT-B-AS/V Y-bearing for your equipment? Write to us on WhatsApp with the full part number, the quantity and the type of application. At MR Accesorios Industriales we reply shortly and send you the corresponding quote. We can also advise you if you are looking for a variant with a different seal or locking system within the INA insert line we supply in Buenos Aires, Argentina.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.