Y-bearing (insert bearing) INA GE80-XL-KRR-B-AH01-FA164

INA GE80-XL-KRR-B-AH01-FA164 is a y-bearing (insert bearing) reference, within Bearings. Request a quote for GE80-XL-KRR-B-AH01-FA164 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The INA GE-XL-KRR-B series Y-bearing is an insert with a spherical outer ring, designed to be mounted in split or pillow block housings and support rotating shafts. It is used in equipment where alignment is not perfect and misalignment must be compensated for. MR Accesorios Industriales supplies this INA line in Buenos Aires, Argentina, and advises you on choosing the correct variant for your application.

The designation of this series is read by blocks: GE indicates the family of insert bearings, the number that follows is the bore diameter, XL corresponds to the long-life design, KRR to the sealing type, B to the design form, and the suffixes AH and FA identify locking and finish variants. For example, in GE80-XL-KRR-B-AH01-FA164 the 80 indicates the shaft diameter and the final codes distinguish the exact version. Send us the complete part number so we can confirm the variant.

These Y-bearings are used in conveyors, belts, elevators, mixers, fans and agricultural or food machinery. In Argentina they are common in food, cement, aggregate and waste treatment plants, where the environment has dust or moisture and a protected insert is required. They also appear in bottling equipment and packaging lines that work with frequent washdowns.

To select correctly, take into account the sealing type: KRR usually indicates lip contact, suitable for retaining grease and blocking dust. Shaft locking can be by set screws or by adapter sleeve, depending on the variant. Check the housing alignment, internal clearance and the intended lubrication. Mounting with impacts or misalignment shortens the life of the insert, even if the bearing is of good quality.

Regarding equivalents, Y-bearings are interchanged between manufacturers by dimensions and locking type, but not by part number: each brand uses its own nomenclature. If you need to replace an insert, compare bore diameter, width, sealing type and locking system. It is not enough for the number to match. MR Accesorios Industriales carries INA as an official brand and can advise you on alternatives within the same line.

If you already have the part number of the Y-bearing you need, send it by WhatsApp to MR Accesorios Industriales along with a photo of the housing or the shaft. With that data we verify the variant and send you the quote shortly. If you are not sure about the suffix, write to us anyway: we will help you identify it.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.