Y-bearing (insert bearing) INA GE50-XL-KRR-B

INA GE50-XL-KRR-B is a y-bearing (insert bearing) reference, within Bearings. Request a quote for GE50-XL-KRR-B via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The INA GE-XL-KRR-B series Y-bearing is a single row insert bearing with a spherical outer ring and a set screw locking system, mounted in split or plummer block housings. It is used for rotating shafts in transmission and conveying equipment, where a compact, self-aligning and easy-to-replace unit is needed. MR Accesorios Industriales supplies this line as an official brand for industrial applications in Buenos Aires, Argentina.

The series designation combines the GE prefix with the shaft diameter and suffixes that define the design. For example, GE17-XL-KRR-B corresponds to a bearing for a 17 mm shaft; GE20-XL-KRR-B, for 20 mm; and so on up to GE50-XL-KRR-B. The XL suffix indicates the higher load capacity design, KRR defines the sealing and locking system, and B identifies the inner ring design. Knowing these part numbers allows you to select the correct replacement without ambiguity.

These bearings are used in belt conveyors, bucket elevators, mixers, fans, pumps and agricultural machinery. In the Argentine market they are common in food plants, cement plants, tanneries and metallurgical facilities, where the environment often has dust, moisture or frequent washdowns. Their mounting in split housings facilitates maintenance and reduces downtime when a unit has to be replaced.

To select correctly, you must verify the shaft diameter, the type of load and the environmental conditions. The KRR sealing protects against contaminants and retains the lubricant; it is advisable to check that the lips are not damaged. Internal clearance and alignment with the housing are critical: misaligned mounting accelerates wear. Lubrication must be suitable for the working temperature, and the set screws are tightened onto the shaft according to the torque recommended by the manufacturer.

As for equivalents, Y-bearings are interchanged between brands according to dimensions and type of locking, but not all suffixes match. The same shaft diameter may have a different sealing, clearance or locking system. Therefore, when ordering a replacement, it is important to provide the complete part number and the operating conditions. MR Accesorios Industriales can advise on interchangeability without compromising equipment performance.

If you need an INA GE-XL-KRR-B series Y-bearing, write to us on WhatsApp with the part number or the shaft dimensions. We will quote you promptly and advise you so that the replacement is the correct one. MR Accesorios Industriales, Buenos Aires, Argentina.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.