INA G1200-KRR-B-AS2/V y-bearing (insert bearing)

INA G1200-KRR-B-AS2/V is a reference of y-bearing (insert bearing), within Bearings. Request a quote for G1200-KRR-B-AS2/V via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The INA G-KRR-B-AS/V series Y-bearing (insert bearing) is an insertable bearing with a spherical outer ring, designed to be mounted in split plummer block or flanged housings to form a bearing unit. It is used in equipment where the shaft rotates and the housing remains fixed, with normal load and speed requirements. MR Accesorios Industriales sells this line, with technical advice to choose the correct part number.

The G-KRR-B-AS/V series designation is read in blocks. The letter G identifies the family of insertable bearings; the number that follows, as in G1010, G1012, G1014, G1015, G1100, G1102, G1103 or G1104-206, indicates the insert size. The KRR-B block indicates the type of sealing and the design of the outer ring, while AS2/V defines execution and locking variants. In part numbers with an additional hyphen, such as G1104-206, the numeric suffix distinguishes a mounting variant. To request a quote, provide the complete part number exactly as it appears on the equipment.

These insertable bearings are used in conveyors, belts, elevators, mixers, fans and agricultural or food machinery. In Argentina they appear in food plants, packing plants, mills, aggregate plants and packaging lines, where the environment may have dust, humidity or frequent washdowns. They are also found in water treatment equipment and textile machines. The combination of insert and housing allows the shaft to be aligned with normal mounting tolerances and the bearing to be replaced without disassembling the structure.

To select correctly, take into account the shaft diameter, the type of load and the environmental conditions. The KRR-B seal protects against dust and splashes; if there are pressure washdowns, it is advisable to evaluate an execution with greater sealing. Locking by set screws on the shaft requires that the seat be clean and free of burrs, and that tightening be done with the appropriate wrench. Factory lubrication is usually enough for the service life, but in humid environments or at high temperatures the relubrication interval should be reviewed. Housing alignment and correct radial clearance prevent parasitic loads.

As for equivalents, insertable bearings are interchanged between brands by standardized dimensions: bore diameter, outside diameter and width. A part number from another brand with the same dimensions can replace the original, but verify the locking type and the sealing, because they do not always match. The AS2/V and KRR-B suffixes may vary between manufacturers. If in doubt, send a photo of the nameplate or the part number engraved on the bearing and we will compare it with the INA G series.

MR Accesorios Industriales sells the INA line. If you need to replace a G-KRR-B-AS/V series Y-bearing, write to us on WhatsApp with the complete part number, the equipment brand or a photo of the insert. We will send you the quote shortly.