Y-bearing (insert bearing) INA E20-XL-KRR

INA E20-XL-KRR is a y-bearing (insert bearing) reference, within Bearings. Request a quote for E20-XL-KRR via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The INA E-XL-KRR series Y-bearing (insert bearing) is an insertable bearing with a spherical outer ring and set screw locking system, designed to be mounted in split or pillow block housings. It is used in equipment where the bearing must be aligned and fixed onto a shaft, with integrated sealing to retain lubricant and block contaminants. MR Accesorios Industriales supplies this line for industrial applications in Buenos Aires, Argentina.

The E-XL-KRR series designation is read in blocks: E indicates the dimensional series of the bearing, XL identifies the design generation with higher capacity and lower friction, and KRR indicates the type of sealing and locking. The examples E20-XL-KRR, E25-XL-KRR, E30-XL-KRR and E35-XL-KRR show how the central number changes according to shaft diameter: the higher the number, the larger the diameter. This nomenclature allows you to quickly identify the size and the sealing variant.

In Argentine industry, these insertable bearings are used in belt conveyors, packaging lines, mixers, mills, grain elevators and process equipment. They also appear in machines for food, chemical, cement and aggregate processing, where mounting in split housings makes assembly and maintenance easier. Being sealed units, they tolerate environments with dust and moderate humidity, typical of manufacturing plants and warehouses.

To select the bearing, verify the shaft diameter and the type of housing where it will be seated. The KRR sealing protects against contaminants and retains grease; if the environment is very aggressive, consider additional seals. During mounting, ensure the housing is aligned and tighten the set screws onto the shaft with the appropriate wrench, without striking the outer ring. Factory lubrication is usually sufficient for the service life, but under severe conditions it is advisable to check the condition of the seal and relubricate if the housing allows it.

The insertable bearings of this series can be interchanged with equivalent products from other brands that share dimensions and type of locking. It is important to compare shaft diameter, overall width, type of sealing and locking system before replacing. At MR Accesorios Industriales we can advise you on the appropriate equivalent based on the part number you send us.

If you need a Y-bearing from the E-XL-KRR series, write to us by WhatsApp with the complete part number (for example, E40-XL-KRR) or the shaft and housing dimensions. We will quote you shortly and advise you so that the replacement is the correct one. MR Accesorios Industriales, Buenos Aires, Argentina, more than 80 years supporting industry.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.