Needle roller thrust bearing INA AXK140180

INA AXK140180 is a needle roller bearing reference, within Bearings. Request a quote for AXK140180 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The INA AXK series needle thrust bearing is a component designed to support axial loads in a minimal space. It consists of a cage with needles that rotates between two washers and is used in applications where the available height is critical. MR Accesorios Industriales carries this INA line, an official brand that MR carries, with more than 80 years of experience in the field. If you need a specific size, send the part number via WhatsApp and we will quote you promptly.

The AXK series designation reads as a size code: the letters identify the needle thrust type and the numbers that follow indicate standardized dimensions. For example, AXK1024 corresponds to a bearing with a 10 mm bore and 24 mm outer diameter; AXK1226 to one of 12 mm by 26 mm; AXK1528 to 15 mm by 28 mm. The examples AXK1730, AXK2035, AXK2542, AXK3047 and AXK3552 follow the same logic. This nomenclature allows you to quickly identify the size without consulting additional tables.

In Argentine industry, INA AXK series needle thrust bearings are used in applications where loads are predominantly axial and axial space is limited. They appear in gearboxes, clutches, pumps, compressors, machine tools and lifting equipment. They are also found in vertical shaft assemblies, rotary tables and slewing mechanisms in agricultural and industrial machinery. Their ability to support axial loads in a reduced height makes them suitable for redesigns where the goal is to make the assembly more compact.

To correctly select an AXK needle thrust bearing, take into account the axial load it must support, the rotation speed and the available space. These units require suitable support washers: a shaft washer and a housing washer, which can be the AS or LS series, depending on the case. Lubrication is essential: with grease or oil, it must be ensured that it reaches the contact zone. Alignment between the washers and the shaft is critical to avoid eccentric loads that reduce service life. Assembly must be carried out with suitable tools so as not to damage the cage or the needles.

Regarding equivalences and interchangeability, needle thrust bearings from different brands may share standardized dimensions, but it is important to verify the complete designation and tolerances. The INA AXK series is a market reference, and other brands offer similar products under their own nomenclatures. It is always advisable to confirm the critical dimensions and operating conditions before replacing one bearing with another from a different manufacturer. MR Accesorios Industriales can advise you on the appropriate equivalent based on the part number you send us.

If you need an INA AXK series needle thrust bearing, send us the part number or size via WhatsApp. At MR Accesorios Industriales we will quote you promptly and help you find the solution that best suits your application. With more than 80 years in the market, we back every inquiry with technical experience and personalized service.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.