HFB BTL 3264 solid housing

HFB BTL 3264 is a reference of solid housing, within Bearing housings. Request a quote for BTL 3264 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

HFB BTL housings are one-piece, non-split units that house bearings and secure them to the structure. They are used to support rotating shafts in transmission, conveying and process equipment, where a rigid base and stable alignment are required. MR Accesorios Industriales sells this line in Buenos Aires, Argentina, and advises you on choosing the right model according to the bearing and the application.

The BTL designation reads as a series of non-split housings: the letters identify the family and the number that follows indicates the size and housing capacity. For example, BTL 3024, BTL 3026 and BTL 3028 share the same construction format and vary in dimensions to suit different shaft diameters. Any suffixes or variants appearing in the part number correspond to sealing, fastening or machining options; to interpret them accurately, send us the complete part number and we will tell you the configuration.

These housings are used in conveyors, elevators, mixers, pumps, fans and process lines in food, chemical, cement and aggregate processing plants. In Argentina, they are common in material handling equipment and in machines operating with moderate loads and medium speeds. Their robust construction makes them suitable for dusty or humid environments, provided the correct sealing is selected for the housed bearing.

To choose the housing, take into account the type and size of bearing it will house, the direction of the loads, the mounting system to the frame and the environmental conditions. Installation requires clean mounting surfaces, alignment with the shaft and even tightening of the bolts. Bearing lubrication must follow the manufacturer's instructions, and the peripheral seal prevents the entry of contaminants. If in doubt, consult us with the application data.

When replacing a housing, it is common to find equivalent parts from other brands. Interchangeability depends on the mounting dimensions, the load capacity and the type of bearing accepted. If you bring the part number of the original part or a sample, at MR Accesorios Industriales we will quote the corresponding BTL or the compatible alternative. Not all series are interchangeable with each other, so it is advisable to verify the geometry before installing.

To move forward with your inquiry, send us the BTL part number you need on WhatsApp, the quantity and, if possible, a photo or drawing of the mounting. That way we will quote you shortly and send you the relevant technical information. If you cannot find the exact reference, write to us with the equipment data and we will help you identify the right housing within the HFB line we sell.