HFB BTL 3056 K solid housing

HFB BTL 3056 K is a reference of solid housing, within Bearing housings. Request a quote for BTL 3056 K via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

HFB BTL K housings are non-split bearing housings, designed to mount the bearing in a single piece and secure it to the machine frame or structure. They are used in equipment where the shaft is assembled axially and a rigid, compact housing is required. MR Accesorios Industriales sells this line and quotes the part number you need on WhatsApp.

The BTL series designation is read from the complete part number: the letters identify the non-split housing family and the number that follows indicates the housing size, that is, the bearing it accepts. The K suffix closes the reference and indicates the construction variant of the housing within the series. That is why BTL 2211 K, BTL 2213 K or BTL 2216 K share the same format but differ in size, and each one houses a different bearing. Send us the complete part number so we can quote it.

These housings appear in conveyors, elevators, mixers, pumps, fans and process lines where the shaft rotates on bearings and a one-piece housing is required. In food, cement, aggregates, water treatment and chemical plants they are chosen when side access is limited and assembly is done by sliding the shaft. They are also found in power transmission equipment and in machines where cleaning or washdown makes a split housing inadvisable.

To select the housing, start from the bearing you are going to mount: the BTL part number must match its series and size. Check the shaft alignment with the mounting face, because a non-split housing does not correct misalignment the way a split one does. Define the sealing according to the environment: dust, water or frequent washdown require additional protection. Bearing lubrication and internal clearance are set according to the type of load and the working temperature. During assembly, seat the housing flat on the frame and tighten the bolts in a cross pattern.

Equivalences between housing brands are resolved by the bearing size and the housing type, not by the commercial part number. If you bring a housing from another brand or an unidentified part, the housing size and the bearing it mounts can be used to locate the equivalent BTL reference. In the BTL series, the number and the K suffix define the size and the variant, so it is best to compare that data before replacing. Write to us on WhatsApp with the part number or the size and we will tell you the compatible alternative.

MR Accesorios Industriales sells the HFB housing line and manufactures split housings, ANSI chains and pulleys in Buenos Aires, Argentina. If you need a BTL K for a running machine, send the complete part number or the housing size on WhatsApp and we will quote it shortly. We can also look at the variant that best suits your assembly.