GUMMI BR-110 TLB flexible coupling

GUMMI BR-110 TLB is a reference of flexible coupling, within Power transmission. Request a quote for BR-110 TLB via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The BR TLB couplings are elastic couplings from the BR line of Gummi, an Argentine coupling manufacturer, with hubs prepared to accept a Taper Lock taper bushing. The bushing is not included with the coupling. They are used to join shafts in power transmissions and to absorb misalignment and vibration. MR Accesorios Industriales sells them as an official distributor of Gummi.

The BR TLB line is based on an elastic center that works between the two hubs and transmits motion while smoothing loads. The TLB variant is distinguished by each hub being prepared for a Taper Lock taper bushing: the bore is not machined and the fit to the shaft is achieved with the bushing. The designation is read with the line letters and the size: BR-100 TLB, BR-110 TLB, BR-150 TLB, BR-160 TLB and BR-180 TLB.

This type of elastic coupling is used in machines that need to transmit torque with a certain tolerance to misalignment: centrifugal pumps, fans, blowers, conveyor belts, mixers and process equipment. In Argentine industry it appears in food, chemical and water treatment plants and in general workshops, where the coupling acts as a mechanical fuse between the motor and the driven machine.

To choose the model, start from the machine torque and apply the service factor according to the type of load; then check the diameter of each shaft against the maximum bore and the corresponding taper bushing. The maximum permissible speed decreases as the size increases, so compare the working rpm with that limit. Shaft alignment is checked before closing the assembly and the elastic center is inspected as part of maintenance.

Each product page shows the model, the Taper Lock Bushing configuration, the maximum bore, the elastic center diameter, the overall length, the maximum speed and the corresponding taper bushing. These data define the variant. If you need help choosing the model, write to us on WhatsApp with the code you have on hand.

To request a quote, send via WhatsApp the model or code of the coupling, the diameter of both shafts, the power and the rpm of the motor and the driven machine. With that we will quote the BR-100 TLB, BR-110 TLB or the size you need. MR Accesorios Industriales, Buenos Aires, Argentina, as an official distributor of Gummi, will reply shortly.