FAG N218-E-XL-TVP2 cylindrical roller bearing
- Brand
- FAG
- Category
- Bearings
- Subcategory
- Cylindrical roller bearings
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
How to read FAG N218-E-XL-TVP2
- N 2Series
- Cylindrical roller bearings, N 2 series. For the same bore, each series has a different outside diameter and width.
- 18Bore
- 90 mm bore: 18 × 5.
- E-XL-TVP2Suffix
- FAG suffix: it defines the variant (sealing, cage, internal clearance or other features).
N 218 is the standard (ISO) basic designation: it defines the type, the series and the bore.
Description
The FAG N218-E-XL-TVP2 bearing has a 90 mm bore, a 160 mm outside diameter and a 30 mm width (90 x 160 x 30 mm).
FAG N218-E-XL-TVP2 is a reference of cylindrical roller bearing, within Bearings. Request a quote for N218-E-XL-TVP2 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The FAG cylindrical roller bearing of the N series is a high radial capacity component, designed to withstand high loads and considerable speeds. Its cylindrical roller and ground raceway design allows precise and long-lasting operation. It is used in industrial applications where rigidity and load capacity are required, such as machine tools, gearboxes and transmission equipment. MR Accesorios Industriales sells this brand.
The N series designation is interpreted as follows: the letter N indicates that the outer ring has no flanges, which allows relative axial displacement. The number that follows (for example, 202, 203, 204) indicates the size and load capacity. The E suffix indicates a reinforced execution with a greater number of rollers. XL designates the X-life design, with optimized surfaces for longer service life. TVP2 identifies the polyamide PA66 cage reinforced with glass fibre, window-guided by the rollers. Thus, an N205-E-XL-TVP2 combines size 05, reinforced execution, X-life design and polyamide cage.
These bearings are used in industries such as metallurgy, cement, mining, food and machine tools. In Argentina, they are common in speed reducers, industrial pumps, compressors, high-flow fans and belt transmission equipment. Their ability to withstand high radial loads and their rigidity make them suitable for transmission shafts and spindles where precision is required. They are also found in mobile applications, such as agricultural machinery and road equipment, where working conditions are demanding.
To select correctly, take into account the radial load to be supported, the rotation speed and the type of lubrication. The N series allows axial displacement in the outer ring, so it is used as a floating support in combination with another fixed bearing. Mounting requires precise alignment and a clean seat; an interference fit on the inner ring is recommended if the load is rotating. The TVP2 cage is suitable for moderate temperatures and oil or grease lubrication. Check internal clearance and sealing according to the environment: for contaminated environments, consider variants with seals.
As for equivalents, cylindrical roller bearings from other brands can be interchanged if the main dimensions, tolerances and execution match. The N designation with E, XL and TVP2 suffixes is specific to FAG, but other manufacturers offer products with similar characteristics under their own nomenclatures. Always check the full part number and operating conditions before replacing. MR Accesorios Industriales sells FAG, with technical advice to choose the right variant.
If you need a bearing of this series, send us the full part number by WhatsApp. At MR Accesorios Industriales we reply shortly with the technical information and the corresponding quote. We can also help you identify the exact variant for your application.
Dimensions
Boundary dimensions of the basic designation N 218 per ISO 15: 90 x 160 x 30 mm (d x D x B).
- Bore
- 90mm
- Outside diameter (D)
- 160mm
- Width (B)
- 30mm
Same size in SKF and other brands
Pages from other brands with the basic designation N 218: 90 x 160 x 30 mm (d x D x B) per ISO 15.
They share the boundary dimensions set by ISO 15, not the technical data: seals or shields, internal clearance, cage and load rating can differ by brand and suffix. We quote each one by its full part number.
Frequently Asked Questions
- What are the dimensions of the FAG N218-E-XL-TVP2 bearing?
- The FAG N218-E-XL-TVP2 bearing has a 90 mm bore, a 160 mm outside diameter and a 30 mm width (90 x 160 x 30 mm). These are the standardised boundary dimensions (ISO 15) of the basic designation N 218.
- What does the TVP2 suffix mean in a FAG bearing?
- TVP2 indicates that the bearing has a polyamide PA66 cage reinforced with glass fibre, window-guided by the rollers. It is a lightweight and resistant cage, suitable for high speeds and moderate temperatures.
- Does the N series allow axial displacement?
- Yes, bearings of the N series have the outer ring without flanges, which allows relative axial displacement between inner and outer rings. They are used as a floating support in configurations with another fixed bearing.
- How do I request a quote for a FAG bearing?
- Write to us by WhatsApp with the full bearing part number, for example N205-E-XL-TVP2. We reply shortly with the quote.