Tapered roller bearing FAG K369-S-362-A

FAG K369-S-362-A is a tapered roller bearing reference, within Bearings. Request a quote for K369-S-362-A via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

FAG tapered roller bearings are separable units made up of a cone (inner ring with rollers and cage) and a cup (outer ring). They are designed to withstand combined radial and axial loads, thanks to the oblique contact between rollers and raceways. They are used in applications where significant forces must be transmitted with high rigidity, such as gearboxes, wheel hubs and reducers. MR Accesorios Industriales supplies this line backed by more than 80 years in the industry.

The designation of these FAG bearings is built from several blocks. In the examples K368-S-362-A, K369-S-362-A and K395-S-394-A, the letter K appears first followed by a number that identifies the cone; then the letter S and another number that corresponds to the cup; and finally the letter A as a suffix. This structure makes it possible to recognize that it is an assembly with interchangeable components within the series. The suffix A usually indicates a design or tolerance variant, but to confirm the exact meaning in each case it is best to check with the complete part number.

In Argentine industry, tapered roller bearings are found in motion and transmission equipment: gearboxes, axles of road machinery, conveyors, mills, presses and rolling mill rolls. They are also present in the automotive and railway sectors, where combined loads and shocks are frequent. Their ability to withstand axial loads in one direction makes them suitable for paired arrangements, which is the usual way of installing them when rigidity is required in both directions.

To correctly select a tapered roller bearing, consider the radial and axial load, the rotation speed and the type of lubrication. Installation requires careful alignment and proper adjustment of the internal clearance, which is achieved by axial displacement of the cup or the cone. Lubrication can be grease or oil, depending on the application and the thermal regime. Sealing is another key point: in dusty or humid environments, it is recommended to protect the assembly with additional seals or oil seals to prevent contamination.

When looking for equivalents from other brands, it is common for cone and cup part numbers to correspond between manufacturers, but you should not rely on the number alone. Dimensions and tolerances can vary slightly, and this affects installation and service life. It is always advisable to verify the actual measurements and the equipment specifications before replacing one bearing with another of different origin. At MR Accesorios Industriales we can guide you to find the right part within the FAG line.

If you need a FAG tapered roller bearing, send us the complete part number on WhatsApp. With that information we can identify the cone, the cup and the suffix, and give you a precise answer shortly. We handle technical inquiries and quote requests, so do not hesitate to write to us.

This description provides guidance on the product type. Check the configuration and dimensions of this reference.